Bedienungsanleitung Satel Integra 64 (Seite 36 von 114) (Englisch)

699075

Zoom out

Zoom in

Vorherige Seite

1/114

Nächste Seite

34 Programming SATEL

TCP/IP connection: DLOADX – ETHM/INT-GSM

The settings below apply to direct communication with the module.

Connection – select the set of parameters that will be used for establishing communication:

PORT and DLOADX KEY.

LAN/WAN – you can enter the parameters yourself.

GSM: INT-GSM, Address n [n=module address] – settings of the INT-GSM module with

the given address will be used.

Port – the number of TCP port used for communication between the control panel and

computer with DLOADX program via the INT-GSM module. You can enter a value from 1

to 65535. Default value: 7090.

DLOADX key – a string of up to 12 alphanumeric characters (digits, letters and special

characters), used for data encryption during communication between the control panel and

the computer with DLOADX program via the INT-GSM module.

SATEL server

The settings below apply to communication with the module via the SATEL server.

Connection – select the set of parameters that will be used for establishing communication:

INT-GSM ID, INT-GSM IMEI and DLOADX KEY.

IMEI (INT-GSM) – you can enter the parameters yourself.

Module: INT-GSM, Address n [n=module address] – settings of the INT-GSM module

with the given address will be used.

INT-GSM ID – individual identification number assigned to the INT-GSM module by the

SATEL server.

INT-GSM IMEI – individual identification number of the GSM telephone of INT-GSM module.

DLOADX key – a string of up to 12 alphanumeric characters (digits, letters and special

characters), used for data encryption during communication between the control panel and

the computer with DLOADX program via the INT-GSM module.

3.3 Local programming

3.3.1 Starting local programming

1. Connect the control panel RS-232 port to the computer port (for the connection method

please refer to the INSTALLER MANUAL).

2. Start the DLOADX program and click on the button. A window will open in which

you should select the computer port to which the control panel is connected. Press “OK”.

3. On the LCD keypad connected to the control panel, enter the service code (by default

12345) and press the

key.

4. Using the  or  key, find the DOWNLOADING submenu and press the or  key.

5. When the arrow indicates the START DWNL-RS function, press the or  key.

To start the local programming function you can use the [service code] 01 key

shortcut.

6. Establishing communication will be signaled on the monitor screen by a corresponding

message.

3.3.2 Starting local programming “from pins”

If the control panel does not support LCD keypads, does not accept the service code, etc.,

you can use the emergency procedure of, so-called, starting “from pins”. The control panel

RS-232 port must be connected to the computer. In the DLOADX program, indicate the

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Integra 64 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Integra 64

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info