Bedienungsanleitung Satel Integra 64 (Seite 74 von 114) (Englisch)

699075

Zoom out

Zoom in

Vorherige Seite

1/114

Nächste Seite

72 Programming SATEL

Confirm commands with “1” [Confirm with 1] – if this option is enabled, the LCD keypad

will require, in case of some functions, additional confirmation with the key 1.

Clear messaging on alarm clearing [Autoabort msg.] – with this option enabled, clearing

the alarm can automatically cancel messaging about this alarm, if the user clearing the

alarm has the TELEPHONE MESSAGING CANCELING right.

Return to menu from Service Mode [SM -> menu] – if this option is enabled, exiting the

service mode will be followed by return to the user menu instead of to the basic operating

mode of the keypad.

Return to menu from menu “Test” [Tests -> menu] – if this option is enabled, exiting the

user function available in the TESTS or CHANGE OPTIONS submenu will be followed by return

to the submenu instead of to the basic operating mode of the keypad.

Fast module bus communication [Fast exp. bus] – it is recommended to enable this option

to speed up communication with the modules. The option should only be disabled in case

of extended security alarm systems, where electric interference may cause problems with

communication.

No module restart reports [No rest. mon.] – when the option is enabled and the Contact ID

or SIA format is used for reporting, no event codes referring to module restarts will be sent

to the monitoring station.

Service message after tamper alarm [Inf.aft.tamper] – when the option is enabled, after any

tamper alarm, the keypads can display on LCD display the message informing that service

maintenance is necessary. The message will be cleared after entering the service code

and confirming it with the key.

Backlight off on AC loss [No AC-no blght] – when this option is enabled, the backlighting in

keypads can be automatically switched off in case of 230 V AC power loss.

Block keypad after 3 wrong codes [Blk aft.w.code] – with this option enabled, entering an

invalid code (reading in an invalid card / DALLAS iButton) three times will block the keypad

(reader) for 90 seconds. After expiry of that time, each next entry of an invalid code (read-

in of an invalid card / DALLAS iButton) will block the device immediately.

Trouble memory until review [Troubl. memory] – if the option is enabled, the trouble

memory can be signaled until it will be cleared (clearing the trouble memory is possible

when exiting the function of viewing troubles in the keypad or in the “Troubles” window,

DLOADX program).

Do not show alarm if armed [Hide alarms] – with this option enabled, no alarms will be

indicated in keypads during the armed mode.

Limit events [Events limit.] – with this option enabled, while armed events from the same

source will be saved into the event log and reported to the monitoring station 3 times only.

Alarming zones review [View clear.al.] – if this option is enabled, in the LCD keypad the

zones that triggered the alarm can be reviewed immediately after the alarm is cleared.

Grade 2 – with this option enabled, the system operates as required by the EN 50131

standard for Grade 2, i.e.:

– starting the arming procedure may be impossible, or, if started, the arming procedure

may fail, if some zones are violated in the partition, or there is a trouble in the system,

– LCD keypads, partition keypads, proximity card arm/disarm devices and reader

expanders do not signal alarms,

–

the

LEDs in keypads indicate alarms only when code has been entered and

confirmed with the key,

– the blinking LED in keypads means that there is a trouble in the system, some

zones are bypassed, or there has been an alarm,

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Integra 64 Seite 74

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Integra 64

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info