699075
83
Zoom out
Zoom in
Vorherige Seite
1/114
Nächste Seite
SATEL INTEGRA 81
Sign. new trouble [New trbl.sign.] with this option enabled, the keypad can audibly signal
the occurrence of a new trouble (if the TROUBLE MEMORY UNTIL REVIEW option is enabled).
New trouble signaling is cleared after the troubles have been reviewed by the user.
Show code entering [Show code ent.] with this option enabled, entering the code is
presented on the keypad display by asterisks.
Show keypad name [Name (2nd row)] with this option enabled, the keypad name is
presented in the lower line of the display.
Exit delay clearing enable [Fin.exit delay] with this option enabled, the exit delay time in
partitions with the EXIT DELAY CLEARING option enabled can be shortened after pressing in
turn the 9
keys.
Show viol. zones [Zone violation] with this option enabled, violating the CHIME signal
triggering zone result additionally in the zone name being displayed.
Auto-Arm delay countdown [Auto-arm delay] with this option enabled, the auto-arm delay
countdown in partition is signaled acoustically.
Displ. mode switching [Dspl.mode chg.] with the option enabled, you can toggle the
display between the standby mode and the partition status display mode by using the 9
key.
Show disarm messages [Show disarming] if this option is enabled, the keypad will inform
about disarming with a displayed message at all times. If the option is disabled only in
case of disarming from the given keypad.
Show arm messages [Show arm] if this option is enabled, the keypad will inform about
arming with a displayed message (irrespective of how the system was armed).
Communication RS if this option is enabled, it is possible to connect a computer with
GUARDX program to the LCD keypad RS-232 port.
Quick control [Control (8#)] if this option is enabled, the OUTS CONTROL user function can
be started by pressing in turn the 8 keys (without the need to enter the user code).
Zones
For each of the keypad zones can be defined whether it will be used or not.
Auto-backlight
If the backlight of display or keys is to be turned on automatically, you can define whether
and which event will additionally turn on the backlight:
Nobacklight will be turned on only when pressing any key.
Viol. of zonebacklight will be additionally turned on when the selected zone is violated.
Entry delay in part. backlight will be additionally turned on when starting the entry delay
countdown in the selected partition.
Tamper signaled in part. [Tamper in part.] partition where alarm will be triggered in the
event of keypad tamper, triggering the alarm from keypad etc.
8.1.2 Volume/filter
You can adjust the volume level for INT-KLCD, INT-KLCDR and INT-KLFR keypads.
Volume volume level of the beeps generated during keypad operation (key pressing,
confirmation of performed operation, etc.).
Volume chimevolume level of the beeps generated after zone violation (CHIME).
Volume entry delayvolume level of the entry delay beeps.
Volume exit delayvolume level of the exit delay beeps.
Volume firevolume level of the fire alarm beeps.
Volume alarmvolume level when signaling burglar, panic and medical alarms
83

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Satel Integra 64 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Satel Integra 64

Satel Integra 64 Zusatzinformation - Deutsch - 121 seiten

Satel Integra 64 Bedienungsanleitung - Deutsch - 54 seiten

Satel Integra 64 Installationsanweisung - Deutsch - 38 seiten

Satel Integra 64 Kurzanleitung - Deutsch - 2 seiten

Satel Integra 64 Bedienungsanleitung - Englisch - 51 seiten

Satel Integra 64 Installationsanweisung - Englisch - 36 seiten

Satel Integra 64 Bedienungsanleitung - Holländisch - 52 seiten

Satel Integra 64 Kurzanleitung - Holländisch - 24 seiten

Satel Integra 64 Zusatzinformation - Holländisch - 121 seiten

Satel Integra 64 Installationsanweisung - Holländisch - 35 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info