Bedienungsanleitung Satel Integra 64 (Seite 106 von 114) (Englisch)

699075

106

Zoom out

Zoom in

Vorherige Seite

1/114

Nächste Seite

104 Programming SATEL

Mode – selection of the messaging type for the given telephone number (0 – voice; 1 –

PAGER type 1; 2 – PAGER type 2; 3 – PAGER type 3, 4 – SMS [only INTEGRA 128-

WRL]).

Round count – the number of attempts made by the control panel to notify the selected

telephone number about the event, if the message reception has not been acknowledged.

If the value 0 is entered, messaging for the indicated telephone number will be disabled.

SMS fwd [Fwd.unknwn.SMS] – if the option is enabled, the control panel will send to the

given telephone number the received SMS messages which contain no control

commands. only INTEGRA 128-WRL

Any code – with this option enabled, it is possible to acknowledge the voice message

reception from the telephone keypad, using any sequence of 4 digits.

Code – 4 digits which, when entered from the telephone keypad, will acknowledge reception

of the voice message.

If no code has been programmed to acknowledge receipt of the voice message, nor

the ANY CODE option has been enabled, the control panel will recognize receipt of the

message as acknowledged when the receiver is picked up after two rings and any

sound occurs.

User – if a code has been programmed to acknowledge receipt of the voice message or the

ANY CODE option has been enabled, a user can be assigned to the telephone. Thus, if the

INT-VG module is connected to the control panel, the user will be automatically granted

access to the voice menu after acknowledgement of the voice messaging.

13.1.2 Events assignment

Enter the following information for the events of which the control panel is to notify:

• number of the voice or text message by means of which messaging will be effected,

• telephones which will be notified.

13.1.3 Clearing

In partitions [Msg.abort in P.]

For each telephone, you can indicate partitions in which clearing an alarm will cancel

messaging that alarm (messaging to that telephone number will be canceled, but can be

continued to other numbers).

After acknowledgement [Msg.abort on T.]

You can indicate telephones which will not be notified about the event, if the control panel

receives acknowledgement that the voice message has been received by another, indicated

telephone.

13.1.4 Pager messages / SMS

Define the content of messages which will be used for PAGER or SMS type messaging.

13.1.5 Pager type

For messaging using the PAGER type messages, you must define the parameters of pager

identification. Default parameters of the pager type 1 are adjusted to the SATEL GSM

module requirements for conversion of the PAGER type message into SMS message.

13.2 Starting the voice messaging

1. Enable the TELEPHONE MESSAGING option.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Integra 64 Seite 106

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Integra 64

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info