Bedienungsanleitung Satel MICRA (Seite 14 von 52) (Englisch)

699548

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

12 MICRA SATEL

You can also program some module functions by means of SMS messages.

4.1 LOCAL PROGRAMMING THROUGH RS-232 (TTL) PORT

Connect the module RS-232 (TTL) port with the USB port on a computer. To make the

connection, use the USB-RS converter offered by SATEL. Indicate in the GPRS-S

OFT

program the computer COM port to be used for communication with the module. To do so,

click on the “Configuration” button (see: Fig. 8 and explanations for the figure) and, in the

window that will open, select the proper COM port. After activation of the selected COM port,

the program will establish communication with the module.

4.2 REMOTE PROGRAMMING USING GPRS TECHNOLOGY

During the remote programming of the module, all functions that require the use

of GSM telephone will be disabled.

Remote programming is possible when the “Remote programming” option is enabled in the

module and the following items have been programmed:

– PIN code (if the card requires entering PIN code);

– Access Point Name (APN) for Internet GPRS connection;

– user name for Internet GPRS connection;

– password for Internet GPRS connection;

– DNS server IP address which is to be used by the module (the DNS server address

requires no programming, if the computer address is entered in the form of IP address,

not a name);

– initialization code for computer connection.

APN, user name, password and DNS server address can be obtained from the GSM

network operator.

The computer on which the GPRS-S

OFT

program will be running must have its address

visible in the Internet (so-called public address). Otherwise, the network server port must be

redirected to that computer, so as to make connection with the computer possible.

In order to establish communication between the module and the computer, do the following:

1. Start the GPRS-S

OFT

program.

2. Click on the "Configuration" button (see: Fig.8 and explanations for the figure) and, in the

wind

ow that will open, enter the number of TCP port selected for communication with the

module. The number will have to be included in the body of SMS message which will be

sent to the module GSM telephone number to initialize communication.

3. Click on the button (see Fig. 8). In the menu that will open, select “TCP/IP” to activate

the server.

4. Send SMS message to the module GSM telephone number. The SMS message should

have the following form: xxxx=aaaa:p= (“xxxx” is the module defined code to initialize

communication with GPRS-S

OFT

program –

“Initiating

SMS”; “aaaa” is the address of the

computer with which the module is to establish communication, shown in the IP address

form or as a name; “p” stands for the number of network port through which

communication with the GPRS-S

OFT

program is to be effected). The module will connect

to the computer whose address was given in the SMS message.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel MICRA Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel MICRA

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info