699548
38
Zoom out
Zoom in
Vorherige Seite
1/52
Nächste Seite
36 MICRA SATEL
Alarm 3 incorrect codes – if this option is enabled, an alarm will be triggered by entering
three times an invalid code from the keypad.
Fire alarm – if this option is enabled, the module will signal the fire alarm triggered from the
keypad (after you press and hold down the key for about 3 seconds).
Aux. alarm – if this option is enabled, the module will signal the medical alarm triggered from
the keypad (after you press and hold down the key for about 3 seconds).
Panic alarm – if this option is enabled, the module will signal the panic alarm triggered from
the keypad (after you press and hold down the key for about 3 seconds).
Silent panic alarm – if this option is enabled, the panic alarm from the keypad will be treated
as the silent panic alarm (without being signaled on the alarm outputs). The field gets
active after selecting the “Panic alarm” option.
Fig. 17. “MKP-300 keypad” tab.
Control
The output control functions can be assigned to keys 1 – 4. To each of them you can assign
one of the functions below (you can make your choice in the drop-down menu that will be
brought up with a click on the
button, or by entering the digit which corresponds to the
selected function):
0: NO,
1: out 1 ON,
2: out 2 ON,
3: out 1 ON (time),
4: out 2 ON (time),
5: out 1 OFF,
6: out 2 OFF.
Messaging / reporting
Notifications on using the keypad to arm / disarm the system, trigger an alarm, or on keypad
tamper, can be delivered in form of an SMS message or with the use of CLIP. You can also
specify in the table whether the code relating to any of these events is to be reported to the
monitoring station.
CLIP T1 – T4 – select the fields of telephones (see: numbers programmed in the “GSM
telephone, Monitoring stations” tab, “Telephone numbers for messaging and test
transmissions” list) which will be informed by means of the CLIP service, if any of the
above described events occurs.
38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Satel MICRA wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Satel MICRA

Satel MICRA Bedienungsanleitung - Deutsch - 52 seiten

Satel MICRA Bedienungsanleitung - Holländisch - 52 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info