Bedienungsanleitung Satel PERFECTA 16-WRL (Seite 19 von 49) (Englisch)

699465

Zoom out

Zoom in

Vorherige Seite

1/49

Nächste Seite

SATEL PERFECTA 17

Trouble memory [Troubles memory] – if this option is enabled, the control panel will also

provide information about troubles that do not exist any more. You can clear the trouble

memory by using keypad (when exiting the trouble review function), PERFECTA

OFT

program or PERFECTA

ONTROL

application. Additionally, the option affects the audible

indication of trouble on the keypad:

– option disabled – the trouble is audibly indicated until restore,

– option enabled – the trouble is audibly indicated until review by using the 7.T

ROUBLES

user function (the user must press to quit the function) or trouble memory clearing

by using the PERFECTA

OFT

program or PERFECTA

ONTROL

application.

SMS notifications confirming ev. [Messaging events] – if this option is enabled, information

about sending SMS notification is saved in the event log.

Zone restore events [Restore events] – when this option is enabled, information about zone

restore is saved in the event log, if zone triggered alarm.

Limit number of events [Events limitat.] – if the option is enabled, events from the same

source are saved into the event log 3 times only. This option does not apply to the alarms

from zones.

Grade 2 [Grade 2] – if the option is enabled, the system operates in accordance with the EN

50131 standard requirements for Grade 2, i.e.:

– the keypad does not audibly signal alarms and troubles/troubles memory,

– the LEDs on the keypad indicates alarms only after the user enters the code and

presses ,

– the LED on the keypad goes off after just one of the partitions is armed in any

mode,

– the flashing LED in keypad means that there is a trouble in the system, some zones

are bypassed, or there has been an alarm,

– the keypad does not display alarm messages,

– the keypad display cannot be switched over to the zone status presentation mode,

– the quick arming from keypad (without entering the code) is not available,

– new access codes in the system must be composed of at least 5 digits,

– partial entering of the code is interpreted as entering an incorrect code,

– the keypad will be blocked after entering an incorrect code three times (cf. B

LOCK AFTER

THREE INCORRECT CODES

option),

– during arming, the control panel checks for problems that prevent arming (cf. P

REVENT

ARMING IF NOT READY

option),

– A

RM EVEN IF NOT READY AFTER EXIT DELAY

, D

O NOT ARM IF BATTERY TROUBLE

and D

O NOT

ARM IF TAMPERED

options are interpreted as disabled,

– control panel gives information about past troubles (cf. T

ROUBLE MEMORY

option),

– loss of communication with SATEL server will cause a trouble (cf. D

O NOT REPORT A

SATEL

SERVER PROBLEM

option),

– tamper of zone or expander can only be signaled by the external siren when the

partition to which the zone or expander belong is armed,

– the number of alarms from the 7. 24

ANIC

and 8. 24

ANIC SILENT

zones is not limited

UTO

RESET

3 option is ignored),

– arming is impossible, if the 6. 24

AMPER

zone is violated (cf. P

RIORITY

option),

– the warning alarm feature is enabled and the warning alarm is being signaled for at

least 30 seconds (cf. W

ARNING TIME

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel PERFECTA 16-WRL Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel PERFECTA 16-WRL

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info