Bedienungsanleitung Satel PERFECTA 16-WRL (Seite 22 von 49) (Englisch)

699465

Zoom out

Zoom in

Vorherige Seite

1/49

Nächste Seite

20 PERFECTA SATEL

The command content must be different from that of the other control commands

programmed in the control panel.

The control command for sending USSD codes can be used for sending SMS

messages through the control panel.

USSD codes from any number [USSD any tel.] – if this option is enabled, the control

command for sending USSD codes or checking balance of the SIM card account can be

sent from any phone. If this option is disabled, only from the phone the number of which is

saved on the control panel (see “Phones” p. 37).

4.2.1 Pre-paid support

USSD-check balance [681.USSDchkSIM1 / 682.USSDchkSIM2] – the USSD code which is

used to check balance of the SIM card account. If the code has been programmed, the

user can check e.g. the account balance by using keypad.

USSD-recharge [683.USSDtopSIM1 / 684.USSDtopSIM2] – the USSD code which is used to

top up the SIM card account. If the code has been programmed, the user can top up the

account by using keypad. Enter $ where the top-up code is to be entered.

Minimum level [685.Min.cr.SIM1 / 686.Min.cr.SIM2] – the minimum amount of funds on the

SIM card account. If the amount of funds drops below the minimum level:

– trouble will be reported,

– where the SIM card account balance is checked automatically by the control panel,

information on the account balance will be sent as an SMS message to the numbers of

phones for which the SMS

FORW

. option is enabled (see “Messaging” p. 37).

Check balance SMS [113.Chk.credit1 / 114.Chk.credit2] – the control command which can

be sent in an SMS message to check the SIM card account balance. You can enter up to 8

alphanumeric characters (digits, letters and special characters). You can enter spaces, but

at least one character must be different from the space.

The command content must be different from that of the other control commands

preprogrammed in the control panel.

Check balance at [687.hh:mm SIM1 / 688.hh:mm SIM2] – time at which the control panel

will check the SIM card account balance every day.

4.3 Keypad

Name [28.Names] – individual name of the keypad (up to 16 characters).

Alarm in part. [22.Partitions] – the partition in which alarm will be triggered in the event of

keypad tamper (opening of enclosure or loss of communication).

4.3.1 Options

Show partition 1 status [Show part.1] – if this option is enabled, the keypad LEDs and

display indicate the status of partition 1. The keypad will indicate the status of partition 2

only after entering code by the user who has access to partition 2.

Show partition 2 status [Show part.2] – if this option is enabled, the keypad LEDs and

display indicate the status of partition 2. The keypad will indicate the status of partition 1

only after entering code by the user who has access to partition 1.

Quick arm - partition 1 [Quickarm part.1] – if this option is enabled, quick arming (without

user authorization) of the partition 1 is possible.

Quick arm - partition 2 [Quickarm part.2] – if this option is enabled, quick arming (without

user authorization) of the partition 2 is possible.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel PERFECTA 16-WRL Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel PERFECTA 16-WRL

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info