Bedienungsanleitung Satel PERFECTA 16-WRL (Seite 26 von 31) (Englisch)

699465

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

24 PERFECTA SATEL

6.18 Replacing battery in wireless keypad

If you want to replace the battery in wireless keypad, you must run the R

EPLACE BATTERY

function first. This will prevent the tamper alarm from being triggered when you open the

keypad enclosure.

1. Enter the user menu.

2. Keep pressing the key until the cursor indicates the R

EPLACE BATTERY

function.

3. Press .

4. After the “SELECT...” message appears, use the or key to find on the list the

wireless keypad in which you want to replace the battery.

5. Press . Tamper alarms from the selected keypad will be blocked for 3 minutes.

During that time you can replace the battery.

6.19 Service access

If the alarm system is to comply with the EN 50131 standard requirements for

Grade 2, the service access should be limited.

The S

ERVICE ACCESS

function allows you to define the rules of access to the system by the

person using the service code (installer/service technician). These rules apply to all methods

of getting access to the alarm system, i.e. by using keypad, PERFECTA S

OFT

program and

PERFECTA C

ONTROL

application.

Starting the function will display the list of options. To scroll the list, use the and

keys.

Active – if this option is enabled, the installer/service technician has access to the alarm

system i.e.:

– after entering the service code, it is possible to enter the service mode and run some

functions available in the user menu,

– it is possible to configure the alarm system by using the PERFECTA S

OFT

program.

Partition 1 – if this option is enabled, the installer/service technician can operate the partition

1 (arm / disarm it, clear alarm, bypass / unbypass zones) and edit the users (he cannot

however grant them access to the partition 2). The option is available, if you have access

to the partition 1.

Partition 2 – if this option is enabled, the installer/service technician can operate the partition

2 (arm / disarm it, clear alarm, bypass / unbypass zones) and edit the users (he cannot

however grant them access to the partition 1). The option is available, if you have access

to the partition 2.

If there is no user in the alarm system having the S

ERVICE ACCESS

right, the

installer/service technician has access to the alarm system (also by using the

PERFECTA S

OFT

program and the PERFECTA C

ONTROL

application), can operate the

partitions and edit the users.

6.20 Establishing communication with PERFECTA SOFT via GPRS

The PERFECTA

OFT

function makes it possible to start communication with the PERFECTA

OFT

program via GPRS to allow remote programming of the control panel. This is one of the

methods for establishing communication between the PERFECTA S

OFT

program and the

alarm control panel. For more information, please refer to the control panel programming

manual.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel PERFECTA 16-WRL Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel PERFECTA 16-WRL

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info