Bedienungsanleitung Satel PERFECTA 32 LTE (Seite 38 von 47) (Englisch)

699537

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

36 PERFECTA LTE SATEL

Encryption [SIA-IP encrypt.] – if the option is enabled, the data being sent are encrypted,

and the date and time are sent with event code (the monitoring station can program the

date and time in the control panel). Option for SIA-IP format.

Send date & time [Timestamp SIA-IP] – if the option is enabled, the date and time are sent

with event code (the monitoring station can program the date and time in the control

panel). Option for SIA-IP format. It is available, when the E

NCRYPTION

option is disabled.

SIA-IP test report period [744.SIA-IP test / 764.SIA-IP test] – in the case of reporting in the

SIA-IP format, an additional transmission can be sent at specified intervals to check

communication with the monitoring station. You can program a number of days, hours,

minutes and seconds between the transmissions. Entering zeros only means that no

additional transmission will be sent.

9.1.2 Test transmissions

The test transmission is sent using all transmission paths included in the list that

defines the order of using transmission paths (cf. R

EPORTING PRIORITY

parameter).

At [791.At] – if the test transmission is to be sent regularly at a specified time, you must

define every how many days and at what time. As for the number of days, 0 is interpreted

as 1 (test transmission will be sent every day).

When armed [793.Armed] – if the test transmission is to be sent at regular intervals when the

system is armed, define every how many days, hours and minutes.

When disarmed [792.Disarmed] – if the test transmission is to be sent at regular intervals

when the system is disarmed, define every how many days, hours and minutes.

Test transmissions regardless of events [Independ.test] – this option refers to the test

transmissions sent at regular intervals (see W

HEN ARMED

and W

HEN DISARMED

parameters).

If this option is enabled, the time is counted from the last test transmission. If the option is

disabled, the time is counted from the last transmission, irrespective of whether it was

a test transmission, or a code of another event was sent.

9.1.3 Events selection

If the CID

–

SELECTED CODES

or SIA

–

SELECTED CODES

reporting format is selected, define

which events are to be sent to the monitoring station.

10. Messaging

The control panel can send notifications about alarm system events by means of:

 voice messages – the voice messages which are to be used for notification should be

saved to the control panel by using the PERFECTA S

OFT

program,

 SMS messages – the content of SMS messages is automatically generated by the control

panel.

10.1 Parameters and options of the messaging

10.1.1 Phones

In the control panel, you can enter data of 8 telephones which will be notified of events in the

alarm system. At the same time, users of these phones can control the alarm system by

using SMS messages.

Name [88.Names] – individual name of the telephone number (up to 16 characters).

Telephone no. [81.Numbers] – the telephone number.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel PERFECTA 32 LTE Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel PERFECTA 32 LTE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info