Bedienungsanleitung Satel PERFECTA 32 LTE (Seite 7 von 30) (Englisch)

699537

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

SATEL PERFECTA LTE 5

companies offering the alarm system monitoring service undertake to intervene if specific

events occur (e.g. alarms, troubles, etc.).

rvice code – a code that allows access to the service mSe ode, as well as some functions in

Se control operability of the installed alarm

of the alarm system to opening the housing of a device which is

ng limited to signaling warning alarm in keypads

te is to be supervised (panic button, siren tamper contact,

n it is in the armed mode. Violations of the zone will be

ignored by the control panel.

that defined for the

ces

the user menu.

rvice technician – the person whose function is to

system and its components, as well as to eliminate possible problems. These duties can

be fulfilled by the installer or a person assigned by him.

ren/beacon – a device providing information about alarms or other events in the alarm

system by means of acoustic or optical signaling.

mper alarm – reactionTa

part of the alarm system, tearing off the device from the wall, cutting through the alarm

system cables, etc. Actions taken by the alarm system may be similar as in the event of

alarm, however, if the tamper alarm occurs, it is advisable to call in the installer so that he

can make a checkup.

er – a person which can operate the alarm system, using a code or remote control keyfob.

arning alarm – in some situations, when the alarm criteria are met, the alarm system does

not take up immediately all the actions provided for in the event of alarm. These actions

are postponed, reaction of the system bei

or on indoor sirens/beacons. Thus, the user who has made a mistake entering the

protected area (without disarming the system first), has some extra time to disarm the

system. Contact your installer to obtain detailed information on the situations when the

alarm will be preceded by warning alarm.

Zone – 1. a separated portion of the protected area that can supervised by a detector. 2. the

terminals on control panel/expander electronics board to which you can connect a detector

or another device whose sta

power supply output indicating loss of 230 VAC supply, etc.).

ne bypassing (inhibiting / isolating) – procedure preventing the alarm from being

triggered by the selected zone whe

Zone violation – a change of the zone status to another, different from

normal state (e.g. as a result of motion being sensed by the motion detector, gas being

sensed by the gas detector, etc.).

5. EN 50131 standard for Grade 2 consequen

If the installer has configured the control panel in compliance with the EN 50131 standard

n provided in the keypads by means of LEDs, display and sound

k arming from keypad (without entering the code) is not available.

4. Arming may be impossible, if one of the situations provided for in the standard occurs

(zone violation, trouble).

How requirements of the standard affect the use of the control panel is described in detail

hereunder.

requirements for Grade 2:

1. The user codes should be composed of at least 5 characters.

2. The amount of informatio

signaling is limited.

3. The quic

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel PERFECTA 32 LTE Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel PERFECTA 32 LTE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info