Bedienungsanleitung Satel PERFECTA 32-WRL LTE (Seite 26 von 30) (Englisch)

699544

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

24 PERFECTA LTE SATEL

6.18 Replacing battery in wireless keypad

If you want to replace the battery in wireless keypad, you must run the REPLACE BATTERY

function first. This will prevent the tamper alarm from being triggered when you open the

keypad enclosure.

1. Enter the user menu.

2. Keep pressing the key until the cursor indicates the REPLACE BATTERY function.

3. Press .

4. After the “SELECT...” message appears, use the or key to find on the list the

wireless keypad in which you want to replace the battery.

5. Press . Tamper alarms from the selected keypad will be blocked for 3 minutes.

During that time you can replace the battery.

6.19 Service access

If the alarm system is to comply with the EN 50131 standard requirements for

Grade 2, the service access should be limited.

The SERVICE ACCESS function allows you to define the rules of access to the system by the

person using the service code (installer/service technician). These rules apply to all methods

of getting access to the alarm system, i.e. by using keypad, PERFECTA SOFT program and

PERFECTA CONTROL application.

Starting the function will display the list of options. To scroll the list, use the and

keys.

Active – if this option is enabled, the installer/service technician has access to the alarm

system i.e.:

– after entering the service code, it is possible to enter the service mode and run some

functions available in the user menu,

– it is possible to configure the alarm system by using the PERFECTA SOFT program.

Partition 1 – if this option is enabled, the installer/service technician can operate the partition

1 (arm / disarm it, clear alarm, bypass / unbypass zones) and edit the users (he cannot

however grant them access to the partition 2). The option is available, if you have access

to the partition 1.

Partition 2 – if this option is enabled, the installer/service technician can operate the partition

2 (arm / disarm it, clear alarm, bypass / unbypass zones) and edit the users (he cannot

however grant them access to the partition 1). The option is available, if you have access

to the partition 2.

If there is no user in the alarm system having the SERVICE ACCESS right, the

installer/service technician has access to the alarm system (also by using the

PERFECTA SOFT program and the PERFECTA CONTROL application), can operate the

partitions and edit the users.

6.20 Establishing communication with PERFECTA SOFT via GPRS/LTE

The PERFECTA SOFT function makes it possible to start communication with the PERFECTA

OFT program via cellular network (data transmission) to allow remote programming of the

control panel. This is one of the methods for establishing communication between the

PERFECTA SOFT program and the alarm control panel. For more information, please refer to

the control panel programming manual.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel PERFECTA 32-WRL LTE Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel PERFECTA 32-WRL LTE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info