699459
24
Zoom out
Zoom in
Vorherige Seite
1/87
Nächste Seite
22 VERSA SATEL
Control panel settings
Parameters and options related to modem communication are described in section “Global
parameters” (p. 26).
3.2.3 Ethernet communication parameters
Programming the parameters
DLOADX program settings
You can configure the Ethernet communication settings in the “Identifiers and tel. no”
window.
Ethernet module settings
You can configure the Ethernet communication settings when programming the Ethernet
module (see: “Ethernet module” p. 51).
Description of the parameters
DLOADX program settings
Connection – you can define two sets of parameters:
LAN/WAN – parameters for communication via local or wide network.
LAN: ETHM-1 – parameters for communication via local network only. In this case, the
port number and data encryption key programmed in the settings of Ethernet module.
Server – address of the Ethernet module. If the Ethernet module is not in the same local
network as the computer with DLOADX program, it must be a public address. You can
enter either the IP address or the domain name.
Port – the number of TCP port used for communication between the control panel and
computer with DLOADX program via Ethernet. You can enter a value from 1 to 65535.
Default value: 7090.
DLOADX key – a string of up to 12 alphanumeric characters (digits, letters and special
characters), used for data encryption during communication between the control panel and
the computer with DLOADX program via Ethernet.
ETHM-1 ID – individual identification number of the Ethernet module for the purpose of
communication via the SATEL server.
ETHM-1 MAC – hardware address of Ethernet module.
Control panel settings
For parameters and options related to communication via Ethernet, see section “Ethernet
module” (p. 51).
3.3 Local programming
3.3.1 Starting local programming
1. Connect the control panel RS-232 (TTL) port with the computer port (for example, by
means of the USB-RS converter offered by SATEL).
2. Start the DLOADX program.
3. If the control panel is connected to other computer port than COM1, click on in the
main menu. The “Configuration” window will open, in which you can select the COM port
to which the control panel is connected.
24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Satel VERSA 10 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Satel VERSA 10

Satel VERSA 10 Kurzanleitung - Deutsch - 11 seiten

Satel VERSA 10 Zusatzinformation - Deutsch - 89 seiten

Satel VERSA 10 Bedienungsanleitung - Deutsch - 44 seiten

Satel VERSA 10 Installationsanweisung - Deutsch - 37 seiten

Satel VERSA 10 Kurzanleitung - Deutsch - 2 seiten

Satel VERSA 10 Kurzanleitung - Englisch - 11 seiten

Satel VERSA 10 Installationsanweisung - Englisch - 36 seiten

Satel VERSA 10 Bedienungsanleitung - Englisch - 32 seiten

Satel VERSA 10 Bedienungsanleitung - Englisch - 42 seiten

Satel VERSA 10 Kurzanleitung - Holländisch - 11 seiten

Satel VERSA 10 Bedienungsanleitung - Holländisch - 44 seiten

Satel VERSA 10 Kurzanleitung - Holländisch - 2 seiten

Satel VERSA 10 Zusatzinformation - Holländisch - 86 seiten

Satel VERSA 10 Installationsanweisung - Holländisch - 35 seiten

Satel VERSA 10 Kurzanleitung - Holländisch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info