Bedienungsanleitung Satel VERSA 10 (Seite 44 von 87) (Englisch)

699459

Zoom out

Zoom in

Vorherige Seite

1/87

Nächste Seite

42 VERSA SATEL

The way of signaling the tamper alarms by the outputs with functions 1. EXTERNAL

SIREN and 2. INTERNAL SIREN depends on the global options TAMPER ALARM ALWAYS

AUDIBLE and TAMPER ALARM ON INTERNAL SIRENS.

3. BURGLARY – signals the alarms from 0 to 5 type zones.

4. FIRE ALARM – signals the fire alarms from keypad and from 10. 24H FIRE type zones.

5. “DURESS” ALARM – signals that code with DURESS right was used for arming/disarming or

alarm clearing.

6. PANIC ALARM – signals the panic alarms from keypad and from 7. 24H PANIC type zones.

7. AUX. ALARM – signals the medical assistance call alarms triggered from keypad and from

9. 24H MEDICAL type zones.

8. ALARM – NOT VERIFIED – signals the unverified alarms.

9. ALARM - VERIFIED – signals the verified alarms.

10. TAMPER ALARM – signals the tamper alarms.

11. FIRE DETECTORS POWER SUPPLY – the dedicated output for power supply of the fire

detectors with automatic verification alarm. After violation of the fire zone the output will be

disabled for 16 seconds. If, after the power is turned on again, another violation from the

fire zone occurs, the fire alarm will be triggered.

12. POWER SUPPLY ON ARMED – the dedicated output for power supply of the detectors which

should not be active when the system is disarmed. It gets activated at the moment of

starting the arming procedure (the exit delay is not taken into account).

13. ZONE VIOLATION – signals violation of the zones.

14. CHIME – signals violation of the zones when they are disarmed.

15. CONTROLLED – controlled by means of zones, timers, keypad or from keyfob.

16. READY STATUS – indicates whether the system is ready for arming, i.e. whether there are

no violated zones (active when there is no violation).

17. EXIT DELAY STATUS – indicates that the EXIT DELAY countdown is running.

18. ARMED STATUS – indicates the armed mode (after completion of the exit delay countdown).

19. TROUBLE STATUS – indicates troubles.

20. A

LARM/ARM STATUS – indicates alarms (pulsating mode) and arm status (continuous mode

– after end of the exit delay countdown).

21. D

ETECTORS RESETTING – dedicated output to control the alarm memory reset in detectors.

Activated at the moment of starting the arming procedure (the exit delay is not taken into

account). It can also be activated by using the OUTPUTS RESET user function.

22. ETHM

TROUBLE STATUS – indicates Ethernet module troubles.

7.3 Output parameters

Output name – individual name of the output (up to 16 characters).

Cut-off time – time during which the alarm outputs and the outputs with functions 13. ZONE

VIOLATION

, 14. CHIME, 15. CONTROLLED and 21. DETECTORS RESETTING are active. Entering

the value 0 modifies the way of functioning of some outputs:

– alarm outputs remain active until the alarm is cleared,

– the 13. ZONE VIOLATION output remains active throughout the time of zone violation (the

PULSE option is disabled then),

– the 14. C

HIME output remains active until deactivated by the OUTPUTS RESET user

function,

– the 15. C

ONTROLLED output remains active until another violation of the controlling zone,

disabling of timer or disabling of the output by means of keypad (bistable mode).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel VERSA 10 Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel VERSA 10

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info