Bedienungsanleitung Satel VERSA 10 (Seite 72 von 87) (Englisch)

699459

Zoom out

Zoom in

Vorherige Seite

1/87

Nächste Seite

70 VERSA SATEL

In the TELIM format, events can only be sent via the analog telephone line.

Telephone

Telephone no. – telephone number of the monitoring station.

Repetitions – the number of attempts to send an event code via the telephone line. If all

attempts fail, the control panel will suspend reporting via the telephone line. Up to 31

retries can be programmed. Programming the value 0 means that monitoring will be

suspended after 8 attempts.

Suspend time – the time for which reporting will be suspended, if attempts fail to send an

event code through all provided transmission paths. The control panel will resume the

attempt of establishing telephone connection with the monitoring station after this time

expires or a next, new event occurs. Up to 30 minutes can be programmed. Programming

the value 0 means that an attempt to establish telephone connection with the monitoring

station will only be taken after occurrence of a new event in the system.

ETHM

Server address – network address of the monitoring station for reporting via Ethernet or.

You can enter either the IP address or the domain name.

Port – number of port used for communication between the control panel and the monitoring

station. You can enter a value from 1 to 65535.

Station key – a string of up to 12 alphanumeric characters (digits, letters and special

characters), which is used for encryption of data sent to the monitoring station.

ETHM key – a string of up to 5 alphanumeric characters to be used for identification of the

control panel for the purposes of reporting via Ethernet.

Identifiers

Event codes are sent to the monitoring station with one of the four identifiers:

 identifier 1 – events from zones (alarms, tampers, troubles),

 identifier 2 – alarms triggered from keypad, arming/disarming by means of zones, quick

arming, loss of communication with wireless devices, as well as expander troubles

and tampers,

 identifier 3 – arming/disarming and alarm clearing by means of code or proximity card,

 system identifier – power supply troubles, zone bypasses, troubles of control panel high-

current outputs, communication bus trouble, programming related events, etc.

The identifier consists of 4 hexadecimal characters (digits or letters from A to F). Entering the

value 0000 means that events assigned to that identifier will not be reported. Using the digit 0

in the identifiers is not recommended.

SIA / TELIM prefix – 2 characters which will precede each of the identifiers in case of the

SIA and TELIM formats. Thus an identifier consisting of 6 characters can be obtained. 2

hexadecimal characters (digits or letters from A to F) can be programmed. Entering 00

means that the prefix will not be added. Using the digit 0 in the prefix is not recommended.

Station 1 options / Station 2 options

SIA – send part. name – if the option is enabled, in the SIA format, the name of partition

where the event took place will also be sent, in addition to the event code.

SIA – send source name – if the option is enabled, in the SIA format, the name of event

source (zone, user, etc.) will also be sent, in addition to the event code.

SIA – confirm each block – if the option is enabled, the control panel will wait for

acknowledgement by the monitoring station of receiving every data block sent in the SIA

format. The option applies to telephone reporting.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel VERSA 10 Seite 72

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel VERSA 10

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info