Bedienungsanleitung Satel VERSA 10 (Seite 77 von 87) (Englisch)

699459

Zoom out

Zoom in

Vorherige Seite

1/87

Nächste Seite

SATEL VERSA 75

By means of the MSG.CLR.CODES user function ([code] 6. SETTINGS

5. MSG.CLR.CODES), the users having the PROGRAMMING right can edit the codes for

acknowledging / clearing notification.

User – the user assigned to the phone number. If the user has the INT-VG ACCESS right and

the INT-VG module is connected to control panel, he will get automatically access to the

voice menu after acknowledging the voice notification.

11.1.3 Event assignment

Specify for the events, the occurrence of which is to be notified by the control panel:

 telephone numbers that will be notified,

 number of the message to be sent. You can assign the text message number to an event.

In the case of voice notifications, the voice message assigned to that text message will be

used.

11.1.4 SMS/Pager messages

You can program up to 64 text messages that will be used for notification. You can assign a

voice message to each text message. The text messages are numbered from 1 to 64. The

voice messages are numbered from 0 to 15 (INT-VG module / CA-64 SM expander can play

back up to 16 voice messages). The same voice message can be assigned to several text

messages.

For PAGER messaging, define the pager identification parameters.

11.1.5 Starting the telephone messaging

1. Enable the TELEPHONE MESSAGING option (see: “Global options” p. 27).

2. Define the number of attempts made by the control panel to notify about the event

(parameters ROUND COUNT and RETRIES NO. FOR ONE ROUND).

3. Enter the phone numbers that are to be notified, and description of those phone numbers.

4. Specify, of which events, which phone numbers and by means of which messages the

control panel is to notify (remember that a text message number is assigned to each

event, and the voice message assigned to that text message will be used for voice

notification).

5. Determine whether alarm clearing should cancel the messaging (global option CLEAR

MESSAGING ON ALARM CLEARING

6. Configure the global options related to telephone communicator:

– determine how the telephone numbers should be dialed (TONE DIALING; in case of the

pulse dialing option – P

ULSE 1/1,5 (OFF 1/2)),

– determine whether the control panel, prior to dialing the number, should check the

telephone line for dialing signal (NO DIAL TONE TEST),

PAGER / SMS messaging

1. Select PAGER1 or PAGER2 as the messaging type for the phone number to be notified.

2. Enter the content of messages that are to be used for notification.

3. Define the pager identification parameters (PAGER1 factory settings are configured for

sending the message as SMS message via the SATEL GSM module).

Voice messaging

1. For the telephone number to be notified:

– select voice messaging as the type of notification,

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel VERSA 10 Seite 77

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel VERSA 10

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info