699459
84
Zoom out
Zoom in
Vorherige Seite
1/87
Nächste Seite
82 VERSA SATEL
12.4 Confirmation on LEDs in the APT-100 keyfob
The list of information that may be presented on the keyfob LEDs is numbered, which makes
programming easier (use the and keys to scroll through the list in the keypad). In
the LED keypad, the number is presented in binary format on LEDs 1-12, in a similar way as
the decimal values (see: page 10, Table 4). Only the values corresponding to the numbers on
the list can be entered.
0. On LED is ON when the control panel has confirmed
receiving information on a keypress
1. Output 1 state LED is ON when the selected output is active
2. Output 2 state
3. Output 3 state
4. Output 4 state
5. Output 5 state
6. Output 6 state
7. Output 7 state
8. Output 8 state
9. Output 9 state
10. Output 10 state
11. Output 11 state
12. Output 12 state
13. Arming: Partition 1 LED is ON when partition 1 is armed
14. Arming: Partition 2 LED is ON when partition 2 is armed
15. Arming: Partition 1 or 2 LED is ON when partition 1 or 2 is armed
16. Arming: Partition 1 and 2 LED is ON when partitions 1 and 2 are armed
17. Partition 1 – Full arm LED is ON when partition 1 is fully armed
18. Partition 1 – Night arm LED is ON when partition 1 is armed in night mode
19. Partition 1 – Day arm LED is ON when partition 1 is armed in day mode
20. Partition 2 – Full arm LED is ON when partition 2 is fully armed
21. Partition 2 – Night arm LED is ON when partition 2 is armed in night mode
22. Partition 2 – Day arm LED is ON when partition 2 is armed in day mode
23. Partition 1 – Alarm LED is ON when there is alarm in partition 1
24. Partition 2 – Alarm LED is ON when there is alarm in partition 2
25. Partition 1 or 2 – Alarm LED is ON when there is alarm in partition 1 or 2
26. Trouble LED is ON when there is trouble in the system
27. Partition 1 – Not armed LED is ON when partition 1 is disarmed
28. Partition 2 – Not armed LED is ON when partition 2 is disarmed
29. Partition 1+2 – Not armed LED is ON when partitions 1 and 2 are disarmed
255. NOT PRESENT LED will not be used for confirmation
13. Compliance with EN 50131 standard requirements for Grade 2
To meet the requirements of EN 50131 standard for Grade 2, do the following:
enable the global options:
– G
RADE 2,
– T
ROUBLE MEMORY UNTIL REVIEW,
84

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Satel VERSA 10 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Satel VERSA 10

Satel VERSA 10 Kurzanleitung - Deutsch - 11 seiten

Satel VERSA 10 Zusatzinformation - Deutsch - 89 seiten

Satel VERSA 10 Bedienungsanleitung - Deutsch - 44 seiten

Satel VERSA 10 Installationsanweisung - Deutsch - 37 seiten

Satel VERSA 10 Kurzanleitung - Deutsch - 2 seiten

Satel VERSA 10 Kurzanleitung - Englisch - 11 seiten

Satel VERSA 10 Installationsanweisung - Englisch - 36 seiten

Satel VERSA 10 Bedienungsanleitung - Englisch - 32 seiten

Satel VERSA 10 Bedienungsanleitung - Englisch - 42 seiten

Satel VERSA 10 Kurzanleitung - Holländisch - 11 seiten

Satel VERSA 10 Bedienungsanleitung - Holländisch - 44 seiten

Satel VERSA 10 Kurzanleitung - Holländisch - 2 seiten

Satel VERSA 10 Zusatzinformation - Holländisch - 86 seiten

Satel VERSA 10 Installationsanweisung - Holländisch - 35 seiten

Satel VERSA 10 Kurzanleitung - Holländisch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info