Bedienungsanleitung Satel VERSA 15 (Seite 6 von 42) (Englisch)

699458

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

4 VERSA SATEL

4. Glossary

Alarm – reaction of the alarm system to detection by the detectors of an intruder in the

protected area, or to another event within the protected area (e.g. glass pane break, gas

detection, etc.). The alarm can be signaled in keypads, proximity card arm/disarm devices,

or by sirens (during a defined time or until cleared). Additionally, information on the alarm

can be sent to the monitoring station or the user.

Alarm zone – the zone whose violation can result in the alarm being triggered. The alarm

zones can be either instant (violation will trigger the alarm at once) or delayed (violation

will only trigger the alarm after a defined period of time has elapsed, e.g. the entry delay).

Armed mode – the status of alarm system in which zone violation will trigger the alarm.

Code – a sequence of digits that allows the user to operate the alarm system by using

keypad.

Day armed mode – the status in which only some zones in the partition are armed, as

selected by the installer. The installer should indicate the zones to be armed when a user

stays in the protected area, but there is no risk of the zones being violated by the user

during the daytime. If no such zones are indicated by the installer, the user will not be able

to arm the partition in this mode.

Detector – the basic component of alarm system, which analyzes the environment and, if

a situation recognized as a threat occurs, transmits appropriate information to the control

panel (e.g. motion detectors on registering motion, magnetic contacts on opening the

door/window, glass-break detectors on breaking glass pane, gas detectors on sensing

gas, etc.).

Entry delay – time counted from the moment of entry into the protected area, which makes it

possible to disarm the partition before the alarm is triggered.

Entry route – the route which the user must have to follow after entry into the protected area

before being able to disarm the system. It is usually the same as the exit route.

Exit delay – time counted from the moment of starting the arming procedure in the partition,

which makes it possible to leave the protected area before the alarm is triggered.

Exit route – the route which the user must have to take after arming before he leaves the

protected area. It is usually the same as the entry route.

Fire alarm – alarm triggered by fire detectors, or from the keypad, in the event of fire.

Full armed mode – the status in which all zones belonging to the partition are armed.

Installer – the person who has installed and programmed the alarm system.

Medical (auxiliary) alarm – alarm triggered by means of a button, or from the keypad, if it is

necessary to call the medical assistance.

Night armed mode – the status in which only some zones in the partition are armed, as

selected by the installer. The installer should indicate the zones to be armed when a user

stays in the protected area, but there is no risk of the zones being violated by the user at

night. If no such zones are indicated by the installer, the user will not be able to arm the

partition in this mode.

Panic alarm – alarm triggered by means of the panic button, or from the keypad, in case of

a hold-up.

Partition – a part of the protected area, composed of a number of zones. The division into

partitions makes it possible to limit the access to part of the premises to some selected

users, and to arm/disarm the system only in part of the protected area.

Passive transponder – a wireless device which has no power supply of its own, but, under

the action of electromagnetic field, it can emit a signal that enables the device to be

identified. It can have the form of proximity card, proximity tag, etc.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel VERSA 15 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel VERSA 15

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info