Bedienungsanleitung Satel VERSA 15 (Seite 59 von 87) (Englisch)

699458

Zoom out

Zoom in

Vorherige Seite

1/87

Nächste Seite

SATEL VERSA 57

ASP-205 – wireless indoor siren. Signaling parameters can be programmed for both

positions occupied by the siren (thus allows to program two different signaling types):

 maximum duration of signaling (optical and acoustic),

 type of acoustic signaling,

 optical signaling option.

ASW-100 E / ASW-100 F – 230 V AC wireless controller. Operating mode can be

programmed.

8.4.3 Configuring the ABAX wireless devices

DLOADX program

You can configure the wireless devices as follows: “VERSA – Structure” window

“Hardware” tab “Expansion modules” branch [ABAX system controller name]

“Zones/Outputs” tab. Before making any changes, click on the “Read” button, and after

making the changes – on the “Write” button (the data relating to the wireless devices are not

read after clicking on the

button or saved after clicking on the button in the

DLOADX program main menu). Described below is how the additional parameters and

options should be programmed in the “Configuration” column.

AGD-100 – enter a digit from the 1 to 3 range to set the sensitivity (1 – low, 2 – medium,

3 - high).

AMD-100 / AMD-101 – enter the digit 0 (bottom reed switch) or 1 (side reed switch) to

determine which of the two reed switches is to be active.

AMD-102 – for the magnetic contact, enter the digit 0 (bottom reed switch) or 1 (side reed

switch) to determine which of the two reed switches is to be active. For the roller shutter

input, enter 2 digits:

digit – number of pulses: from 1 to 8.

digit – pulse validity: 0 (30 seconds), 1 (120 seconds), 2 (240 seconds) or 3 (unlimited

duration).

AOCD-250 – enter 2 digits:

digit – sensitivity of PIR sensor: from 1 to 4 (1 – minimum; 4 – maximum).

digit – sensitivity of microwave sensor: from 1 to 8 (1 – minimum; 8 – maximum).

AOD-200 – for the first position taken by the detector, enter 3 digits:

digit – sensitivity of PIR sensor: from 1 to 4 (1 – minimum; 4 – maximum).

digit – sensitivity of microwave sensor: from 1 to 8 (1 – minimum; 8 – maximum).

digit – sensitivity of dusk sensor: from 1 to 4 (1 – minimum; 4 – maximum).

APMD-150 – enter 3 digits:

digit – sensitivity of PIR sensor: from 1 to 4 (1 – minimum; 4 – maximum).

digit – sensitivity of microwave sensor: from 1 to 8 (1 – minimum; 8 – maximum).

digit – the way of operation in the test mode: 0 (alarm triggered after motion is sensed

by both detectors), 1 (alarm triggered after motion is sensed by infrared detector) or 2

(alarm triggered after motion is sensed by microwave detector).

APD-100 – enter 2 digits:

digit – sensitivity: 1 (low), 2 (medium) or 3 (high),

digit – pet immunity option: 0 (disabled) or 1 (enabled).

ARD-100 – enter a number from the 1 to 16 range to determine sensitivity (1 – minimum;

16 – maximum).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel VERSA 15 Seite 59

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel VERSA 15

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info