Bedienungsanleitung Satel VERSA 15 (Seite 73 von 87) (Englisch)

699458

Zoom out

Zoom in

Vorherige Seite

1/87

Nächste Seite

SATEL VERSA 71

SIA – id. conf. required – if the option is enabled, the control panel will wait for

acknowledgement by the monitoring station of receiving the identifier with which the data

were sent. The option applies to telephone reporting.

Longer waiting for initial handshake – if the option is enabled, the control panel will wait

longer for handshake from the monitoring station in case of sending events in the Ademco

Express, Contact ID or SIA format. Enable this option in the event of telephone reporting, if

the monitoring station sends a non-standard initial handshake.

Long kiss-off signal – if the option is enabled, the control panel will accept a long kiss-off

(acknowledgment) signal for receiving events in case of Ademco Express and Contact ID

formats. Enable this option in the event of telephone reporting, if the monitoring station

acknowledges receiving events in a non-standard way (the kiss-off signal is longer than

800 ms).

10.2.3 Test transmissions

The test transmission may be sent:

 at a specified time. The test transmission code will be sent regularly at a defined time. The

number of days between transmissions and the time of sending transmission are

programmed. Programming the value 0 for days means that the transmission will be sent

everyday (in the same way, as in case programming the value 1).

 in specified time intervals. You can program the time intervals in which test transmissions

are to be sent when the system is disarmed and when the system is armed (number of

days, hours and minutes). The test transmission code will be sent:

– after a predefined period of time has elapsed since the last transmission, irrespective of

whether it was a test transmission, or the code of another event was sent (the NO SYNC.

TO LAST TRANSMISSION

option disabled),

– at predefined time intervals (the NO SYNC. TO LAST TRANSMISSION option enabled).

10.3 SIA-IP

10.3.1 Monitoring station 1 / Monitoring station 2

IP format – if the event codes are to be sent via Ethernet, specify whether SATEL format or

SIA-IP format (SIA DC-09 standard) will be used.

Protocol – if the event codes are to be sent via Ethernet, specify whether TCP or UDP

protocol will be used.

Options – options related to SIA-IP format:

Send MAC address – if this option is enabled, the MAC address is sent with event code.

Send timestamp – if this option is enabled, the date and time are sent with event code

(the monitoring station can change the date and time in the control panel).

Encrypt data – if the option is enabled, the data being sent are encrypted, and the date

and time are sent with event code (the monitoring station can change the date and time

in the control panel).

SIA-IP key – the key to encrypt data to be sent using the SIA-IP format.

hex – if the option is enabled, you can enter up to 32 hexadecimal characters as the

SIA-IP

KEY

. If the option is disabled, you can enter up to 16 alphanumeric characters as the

SIA-IP KEY.

SIA-IP acct – a string of up to 16 hexadecimal characters, which is used to identify the

control panel for the purpose of reporting in SIA-IP format.

Supervision interval – in the case of reporting in the SIA-IP format, an additional

transmission can be sent at specified intervals to check communication with the monitoring

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel VERSA 15 Seite 73

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel VERSA 15

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info