Bedienungsanleitung Satel VERSA 5 (Seite 22 von 32) (Englisch)

699460

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

20 VERSA SATEL

2. Step 1. Selecting user whose data are to be edited. You can make your selection by

using the and keys or by entering the user number (the LED designated by

the number of selected user should start blinking). Having selected the user, press .

You can press to interrupt the procedure of editing a user. Any changes made in

the steps ended by pressing the key will be saved.

3. Step 2. Changing user code. Proceed in the same way as when adding a new user.

4. Step 3. Selecting user schedule. Proceed in the same way as when adding a new user.

5. Step 4. Selecting partitions accessible to the user. Proceed in the same way as when

adding a new user.

6. Step 5. Editing 433 MHz keyfob. Press:

– , if you want to move on to the next step,

– and in turn, if you want to add a keyfob (the procedure is similar to that for

adding a 433 MHz keyfob to a new user, however, if the user had a keyfob before, the

control panel, during assignment of functions to the buttons, will suggest the same

functions as were assigned to the removed keyfob),

– and in turn, if the user has a keyfob and you want to edit functions

assigned to the keyfob buttons (the procedure is similar to that for assigning functions

after a 433 MHz keyfob has been added to a new user),

– and in turn, if you want to remove a keyfob.

Removal of the keyfob does not erase its settings (functions assigned to the keyfob).

The installer can remove all the 433 MHz keyfobs and their settings by using the

REM.RX K-FOBS function (SERVICE MODE 2. HARDWARE 1. KPDS. & EXPS.

9. REM.RX K-FOBS).

7. Step 6. Editing APT-100 keyfob. Press:

– , if you want to move on to the next step,

– and in turn, if you want to add a keyfob (the procedure is similar to that for

adding the APT-100 keyfob to a new user, however, if the user had a keyfob before,

the control panel, when assigning functions to the buttons and defining the rules of

confirmation, will suggest the same settings as for the removed keyfob),

–

and in turn, if the user has a keyfob and you want to edit functions

assigned to the keyfob buttons (the procedure is similar to that for assigning functions

after an APT-100 keyfob has been added to a new user),

–

and in turn, if you want to remove a keyfob.

Removal of the keyfob does not erase its settings (functions assigned to the keyfob

and rules of confirmation).

The installer can remove all the APT-100 keyfobs and their settings by using the

REM.ABAX KFBS function (SERVICE MODE 2. HARDWARE 1. KPDS. & EXPS. 8.

REM.ABAX KFBS).

– and in turn, if the user has a keyfob and you want to edit the rules of

confirmation (the procedure is similar as for defining the rules of confirmation after an

APT-100 keyfob has been added to a new user).

8. Step 7. Editing proximity card. Press:

– , if you want to move on to the next step,

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel VERSA 5 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel VERSA 5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info