Bedienungsanleitung Satel VERSA 5 (Seite 31 von 87) (Englisch)

699460

Zoom out

Zoom in

Vorherige Seite

1/87

Nächste Seite

SATEL VERSA 29

Warning alarm on internal sirens – if the option is enabled, the warning alarm will be

signaled on outputs with the 2. INTERNAL SIREN function. The option is available, if the

WARNING ALARM option is enabled.

Tamper alarm always audible – if the option is enabled, the tamper alarm will be signaled

always on outputs with the 1. EXTERNAL SIREN and 2. INTERNAL SIREN functions (if the

option is disabled, only in armed mode). Also, lack of the expander is always saved in

the event log as a tamper alarm. If the option is disabled, lack of the expander will be

saved in the event log:

– as a trouble, if the partition to which the expander is assigned, is disarmed (but the

keypad will signal tamper alarm anyway),

– as a tamper alarm, if the partition is armed.

Tamper alarm on internal sirens – if the option is enabled, the tamper alarm will be

signaled always on outputs with the 2. INTERNAL SIREN function (in armed mode only if the

option is disabled). Additionally, the output will always signal lack of the expander (also

when the event is logged as a trouble – see: T

AMPER ALARM ALWAYS AUDIBLE option).

Block after 3 unknown codes/cards – if the option is enabled, after entering an incorrect

code / reading in an incorrect card three times, the keypad / proximity card arm/disarm

device will be blocked for 90 seconds. After this period of time has expired, each

subsequent entry of an incorrect code / read-in of an incorrect card will block the keypad /

proximity card arm/disarm device at once. The counter of incorrect codes / cards will be

reset after a correct code is used.

Service Mode from RESET pins – if the option is enabled, it is possible to start the service

mode and local programming “from pins”. You can enable/disable the option in keypad:

ERVICE MODE 0. SRVMOD CONFIG 6. SRVMOD OPT. SRVMOD VIA RESET.

Limit storing "Test transm." events – when the option is enabled, if the “Test transmission”

events directly follow one another, they are only written to the event log 3 times.

Information on sending next test transmissions is not recorded. Any other event occurring

in the system will reset the counter, i.e. it will be possible to log next three consecutive test

transmissions.

Backlight off on AC loss – when the option is enabled, the backlighting in keypads is

automatically switched off in case of 230 V AC power loss.

Answering/remote control when armed partition 1 / 2 – if the option is enabled, telephone

answering and remote control features are only available when selected partitions are

armed.

Additionally, the list of global options in the keypad includes:

 TMP ALARM IN P.2 – alarm from the mainboard TMP zone is signaled in partition 2.

In the DLOADX program, the partition in whic

h alarm from TMP zone will be

signaled is to be selected in the “VERSA – Structure” window, “Hardware” tab, after

clicking on the system name on the left side,

 EVENTS LIMITAT., EXP. RESTART. REP., REST. AFT. BELL and REST. AFT. DISARM. –

options available in the DLOADX program, “VERSA – Reporting” window, and

described in section “Reporting parameters and options” (p. 68).

4.3 Global times

Keypad’s alarm time – time period during which alarm is signaled in keypads and proximity

card arm/disarm devices. Up to 255 seconds can be programmed. Programming the value

0 means that the KEYPAD’S ALARM TIME will be 3 seconds.

No armed indication after – time counted from the moment of partition arming, after expiry

of which the keypad LED indicating the partition armed status will go out. Up to 255

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel VERSA 5 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel VERSA 5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info