Bedienungsanleitung Satel VERSA 5 (Seite 35 von 87) (Englisch)

699460

Zoom out

Zoom in

Vorherige Seite

1/87

Nächste Seite

SATEL VERSA 33

Verification time – programming a value different from 0 means activating the alarm

verification feature in the partition. Subject to verification are alarms from 0 to 5 type

zones. The VERIFICATION TIME runs from the moment of alarm being triggered by such a

zone. If during the VERIFICATION TIME an alarm is triggered by another zone in the partition,

programmed as 0 to 5 type, the control panel will report a verified alarm. The time is

programmed in minutes. Up to 255 minutes can be programmed.

Entry delay in Day Arm – with this option enabled, after partition is armed in day mode with

no delay, the entry delay time remains valid (there is only no exit delay time). With this

option disabled, after partition is armed with no delay, there is neither exit delay nor entry

delay time.

Entry delay in Night Arm – with this option enabled, after partition is armed in night mode

with no delay, the entry delay time remains valid (there is only no exit delay time). With this

option disabled, after partition is armed with no delay, there is neither exit delay nor entry

delay time.

Auto-arming delay – the time counted from the moment when the timer is to arm the

partition, enabling the arming to be deferred. The delay time is programmed in seconds.

Up to 255 seconds can be programmed. Programming the value 0 means that the arming

deferment will be unavailable.

Deferment time – the time by which the user can defer arming by the timer. The time is

programmed in minutes. Up to 255 minutes can be programmed. Programming the value 0

means that the arming deferment will be unavailable.

Simple deferment – if the option is enabled, the user can defer auto-arming by pressing the

key twice during the auto-arm delay time countdown.

Single deferment – if the option is enabled, the user can only use the simple deferment

once, so as to postpone the auto-arming. Subsequent arming deferments are only

possible by using the A-ARM DEFER. user function ([CODE] 6. SETTINGS 1. A-ARM

DEFER

.).

Timer priority – if this option is enabled, the timer always disarms the system (if the option is

disabled, the timer will only disarm the system, if it armed it).

6. Zones

A zone can be assigned to one or two partitions. If the zone is assigned to two partitions, it

can be armed when both partitions are armed or one of them only.

The system supports the following zones:

 hardwired – on the control panel PCB and in expanders. The number of available

hardwired zones is determined by the control panel during the identification procedure.

 wireless – after connecting the 433 MHz wireless system controller (VERSA-MCU) or the

ABAX wireless system controller (ACU-120, ACU-270, ACU-100 or ACU-250). The

number of available wireless zones depends on the number of wireless devices registered

in the system and is determined during the procedure of adding them.

 virtual – zones which do not physically exist, but are controlled by means of keyfobs.

6.1 Programming the EOL resistor values

For the zones on the control panel mainboard and in zone expanders identified by the control

panel as CA-64 Ei and CA-64 EPSi, the value of end-of-line resistors is programmable within

the range from 500  to 15 k.

You can define the resistor value for the control panel zones:

 DLOADX program: “VERSA – Structure” window “Hardware” tab [main board],

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel VERSA 5 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel VERSA 5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info