Bedienungsanleitung Satel VERSA 5 (Seite 47 von 87) (Englisch)

699460

Zoom out

Zoom in

Vorherige Seite

1/87

Nächste Seite

SATEL VERSA 45

– 21. DETECTORS RESETTING – the output activates for a preset time, when the arming

procedure is initiated in the selected partition (without taking into account the exit delay).

The users authorized to access the given partition can activate the output by using the

OUTPUTS RESET function.

Reset in partition 1 / Reset in partition 2 – depending on the output function:

– 11. FIRE DETECTORS POWER SUPPLY – the users having access to the selected partition

can deactivate the output for 16 seconds by means of the OUTPUTS RESET user function,

– 14. CHIME, for which the CUT-OFF TIME equal to 0 has been programmed – the users

having access to the selected partition can deactivate the output by means of the

OUTPUTS RESET user function.

Pulse – output with pulsating mode of operation (0.5/0.5 sec.). This option refers to the

outputs for which the cut-off time is to be programmed (except for the 1. EXTERNAL SIREN

and 2. INTERNAL SIREN outputs), and outputs with the 17. EXIT DELAY STATUS, 18. ARMED

STATUS

, 19. TROUBLE STATUS and 22. ETHM TROUBLE STATUS functions.

Polarity +12V – sets the output operating mode. If the option is disabled, the output is

inverted.

“–” terminal of high-current output / low-current output

option enabled

(normal polarity)

option disabled

(reverse polarity)

active state

shorted to ground disconnected from ground

inactive state

disconnected from ground shorted to ground

Table 6. Mode of output operation depending on the POLARITY +12V option.

Fire alarms sign. – option for the 1. EXTERNAL SIREN and 2. INTERNAL SIREN outputs. The

output signals in pulsating mode the fire alarms from selected zones (see: ACTIVATION:

ZONES

) and partitions (see: ALARM SIGNALING – PARTITION 1 and ALARM SIGNALING –

PARTITION

2 output options).

One partition sign. – option for the 18. ARMED STATUS and 20. ALARM/ARM STATUS outputs.

The output indicates armed mode when any of the two partitions is armed (if the option is

disabled, only when both partitions are armed).

Arm/Disarm/Clear sign. – option for the 1. EXTERNAL SIREN and 2. INTERNAL SIREN outputs

(see also: C

LEARING FROM PART. 1 and CLEARING FROM PART. 2 output options and

RM./DISARM./CLEAR. SIGNALING FROM ZONES ONLY global option). The output signals:

– starting the arming procedure (which is equivalent to arming if no exit delay has been

programmed) – 1 tone,

– disarming – 2 tones,

– alarm clearing – 4 tones,

– denial of arming or arming procedure failure (see: PREVENT ARMING IF NOT READY global

option or GRADE 2 global option) – 7 tones.

Tone duration is about 0.3 second.

Alarm signaling – part. 1 / Alarm signaling – part. 2 – an option for the alarm outputs. The

output signals the selected partition alarms which were not triggered by zones.

Timer 1 / Timer 2 / Timer 3 / Timer 4 – options for the 15. CONTROLLED outputs. The output

is controlled by selected timer (if timer status changes to “ON", the output will be activated

for the CUT-OFF TIME).

Mainboard TMP input – an option for the 1. EXTERNAL SIREN, 2. INTERNAL SIREN and

10. T

AMPER ALARM outputs. The output will be activated by the mainboard tamper (violation

of the mainboard TMP zone).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel VERSA 5 Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel VERSA 5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info