Bedienungsanleitung Satel VERSA 5 (Seite 80 von 87) (Englisch)

699460

Zoom out

Zoom in

Vorherige Seite

1/87

Nächste Seite

78 VERSA SATEL

12. User schedules

The control panel offers 5 user schedules. The user schedule defines the user rights. When

adding or editing a user, one of the user schedules is selected.

The default settings of keyfob are tied to the user schedule. If a keyfob is assigned to the

user, the default keyfob settings will be suitable for the user schedule.

Changing the rights in user schedule results in a change of rights of all the users to

whom that schedule was assigned.

Changing the keyfob default settings has no effect on the settings of keyfobs which are

already added to the users.

12.1 Configuring the user schedules

You can configure the user schedules:

 DLOADX program: “VERSA – Users” window “Users Schedules” tab (Fig. 26).

 functions available in the USR TEMPLATES submenu (SERVICE MODE 8. USR TEMPLATES).

12.2 Parameters of the user schedule

Schedule name – individual name of the user schedule (up to 16 characters).

Right – defines which functions are available to the user. The following rights are available:

Arming – the user can arm the system.

Disarming – the user can disarm the system.

Alarm clearing – the user can clear alarms.

Tel. mess. clearing – the user can cancel messaging by means of the ABORT V.MSG. user

function (if he has at same time the ALARM CLEARING right and the CLEAR MESSAGING ON

ALARM CLEARING

global option is enabled, the messaging will be automatically canceled

when the alarm is cleared).

Auto-arming defer – using the A-

ARM DEFER. function ([CODE] 6. SETTINGS

1. A-

ARM DEFER.), the user can defer arming by the timer.

Zone inhibition – the user can inhibit the system zones by means of the INHIBIT function

([CODE] 4. BYPASSES 1. INHIBIT).

Zone isolation – using the I

SOLATE function ([CODE] 4. BYPASSES 1. ISOLATE),

the user having additionally the ZONE INHIBITION right can isolate the system zones.

Change access code – the user can change own access code (C

HANGE CODE function).

Users editing – the user can add, edit and delete users (USERS function).

Control – the user can control the outputs by means of the CONTROL function.

Programming – the user has access to the SETTINGS function, which allows him to

program the control panel clock, timers, telephone numbers for messaging and codes to

clear messaging.

DOWNLOAD/SERVICE – the user can define the rules of service access, initiate remote

programming of the control panel from the keypad and replace batteries in the wireless

keypads.

Inspection – the user has access to the EVENT LOG and SYSTEM STATE functions. In case

of arming by means of the LCD keypad, the user gets information about bypassed

zones and causes of denial of arming, if any (the user can enforce the arming).

Tests – the user has access to the TESTS submenu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel VERSA 5 Seite 80

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel VERSA 5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info