Bedienungsanleitung Satel Versa IP (Seite 46 von 93) (Englisch)

629722

Zoom out

Zoom in

Vorherige Seite

1/93

Nächste Seite

44 VERSA IP SATEL

27. Low battery (keyfobs)

28. Module restart

29. Control panel restart

For the 22. ETHM TROUBLE STATUS output function, these can be the following troubles (the

number corresponds to the LED number in the LED keypad and to the item number in

graphic mode in the LCD keypad):

1. Reporting trouble – station 1 – ETHM

2. Reporting trouble – station 2 – ETHM

21. No Ethernet connection

22. No Ethernet connection (PING)

23. No connection to SATEL server

24. Wrong pair MAC/ID

7.4 Output options

Clearing from part. 1 / Clearing from part. 2 – depending on the output function:

– alarm outputs – the alarm can be cleared by users having access to the selected

partition,

– the 1. EXTERNAL SIREN and 2. INTERNAL SIREN outputs with enabled ARM/DISARM/CLEAR

SIGN

. option – the output will be activated when in the selected partition the procedure of

arming has been initiated, arming is not possible, armed mode is deactivated, or when

alarm is cleared in it,

– 5. “DURESS” ALARM – the users having access to the selected partition can deactivate

the output by means of the OUTPUTS RESET user function.

Partition 1 / Partition 2 – depending on the output function:

– 12. POWER SUPPLY ON ARMED – the output is active when the selected partition is armed

(it activates after starting the arming procedure, without taking the exit delay into

account),

– 15. CONTROLLED – the output can be controlled by the users having access to the

selected partition by means of the user function C

ONTROL (if no partition is selected, the

function CONTROL will not be available in the keypad),

– 17. E

XIT DELAY STATUS – the output is active when the exit delay countdown is running in

the selected partition,

– 21. DETECTORS RESETTING – the output activates for a preset time, when the arming

procedure is initiated in the selected partition (without taking into account the exit delay).

The users authorized to access the given partition can activate the output by using the

OUTPUTS RESET function.

Reset in partition 1 / Reset in partition 2 – depending on the output function:

– 11. FIRE DETECTORS POWER SUPPLY – the users having access to the selected partition

can deactivate the output for 16 seconds by means of the OUTPUTS RESET user function,

– 14. CHIME, for which the CUT-OFF TIME equal to 0 has been programmed – the users

having access to the selected partition can deactivate the output by means of the

OUTPUTS RESET user function.

Pulse – output with pulsating mode of operation (0.5/0.5 sec.). This option refers to the

outputs for which the cut-off time is to be programmed (except for the 1. E

XTERNAL SIREN

and 2. I

NTERNAL SIREN outputs), and outputs with the 17. EXIT DELAY STATUS, 18. ARMED

STATUS

, 19. TROUBLE STATUS and 22. ETHM TROUBLE STATUS functions.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Versa IP Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Versa IP

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info