Bedienungsanleitung Satel Versa IP (Seite 79 von 93) (Englisch)

629722

Zoom out

Zoom in

Vorherige Seite

1/93

Nächste Seite

SATEL VERSA IP 77

12.1.4 SMS/Pager messages

You can program up to 64 text messages that will be used for notification. You can assign a

voice message to each text message. The built-in voice module can play back up to 16 voice

messages. You can synthesize the voice messages using the VG-SOFT program (see: “VG-

Soft program and voice module configuring” p. 84). The text messages are numbered from 1

to 64. The voice messages are numbered from 0 to 15. The same voice message can be

assigned to several text messages.

For PAGER messaging, define the pager identification parameters.

12.1.5 Starting the telephone messaging

1. Enable the TELEPHONE MESSAGING option (see: “Global options” p. 27).

2. Define the number of attempts made by the control panel to notify about the event

(parameters R

OUND COUNT and RETRIES NO. FOR ONE ROUND).

3. Enter the phone numbers that are to be notified, and description of those phone numbers.

4. Specify, of which events, which phone numbers and by means of which messages the

control panel is to notify (remember that a text message number is assigned to each

event, and the voice message assigned to that text message will be used for voice

notification).

5. Determine whether alarm clearing should cancel the messaging (global option C

LEAR

MESSAGING ON ALARM CLEARING

6. Configure the global options related to telephone communicator:

– determine how the telephone numbers should be dialed (TONE DIALING; in case of the

pulse dialing option – PULSE 1/1,5 (OFF 1/2)),

– determine whether the control panel, prior to dialing the number, should check the

telephone line for dialing signal (NO DIAL TONE TEST),

PAGER / SMS messaging

1. Select PAGER1 or PAGER2 as the messaging type for the phone number to be notified.

2. Enter the content of messages that are to be used for notification.

3. Define the pager identification parameters (PAGER1 factory settings are configured for

sending the message as SMS message via the SATEL GSM module).

Voice messaging

1. For the telephone number to be notified:

– select voice messaging as the type of notification,

– enter the code, if the telephone user can confirm having listened to the voice message

and clear the messaging,

– indicate the alarm system user, if the telephone user is to automatically get access to

the voice menu after entering the code (the user must have the INT-VG ACCESS right).

2. Assign voice messages to text messages.

3. Synthesize the voice messages that are to be used for notification (see: “VG-Soft program

and voice module configuring” p. 84).

Determine whether the control panel is to play back the voice message after going off-

hook, or 8/16 seconds after the dialing is completed (N

O ANSWER TONE TEST).

12.2 E-mail messaging

E-mail messages are sent by means of the Ethernet communication module. The content of

e-mail messages is automatically generated by the control panel.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Versa IP Seite 79

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Versa IP

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info