Bedienungsanleitung Satel Versa IP (Seite 83 von 93) (Englisch)

629722

Zoom out

Zoom in

Vorherige Seite

1/93

Nächste Seite

SATEL VERSA IP 81

Right – defines which functions are available to the user. The following rights are available:

Arming – the user can arm the system.

Disarming – the user can disarm the system.

Alarm clearing – the user can clear alarms.

Tel. mess. clearing – the user can cancel messaging by means of the ABORT V.MSG. user

function (if he has at same time the ALARM CLEARING right and the CLEAR MESSAGING ON

ALARM CLEARING

global option is enabled, the messaging will be automatically canceled

when the alarm is cleared).

Auto-arming defer – using the A-ARM DEFER. function ([CODE] 6. SETTINGS

1. A-ARM DEFER.), the user can defer arming by the timer.

Zone inhibition – the user can inhibit the system zones by means of the INHIBIT function

([CODE] 4. BYPASSES 1. INHIBIT).

Zone isolation – using the ISOLATE function ([CODE] 4. BYPASSES 1. ISOLATE),

the user having additionally the Z

ONE INHIBITION right can isolate the system zones.

Change access code – the user can change own access code (C

HANGE CODE function).

Users editing – the user can add, edit and delete users (USERS function).

Control – the user can control the outputs by means of the CONTROL function.

Programming – the user has access to the SETTINGS function, which allows him to

program the control panel clock, timers, telephone numbers for messaging and codes to

clear messaging.

DOWNLOAD/SERVICE – the user can define the rules of service access, initiate remote

programming of the control panel from the keypad and replace batteries in the wireless

keypads.

Inspection – the user has access to the EVENT LOG and SYSTEM STATE functions. In case

of arming by means of the LCD keypad, the user gets information about bypassed

zones and causes of denial of arming, if any (the user can enforce the arming).

Tests – the user has access to the TESTS submenu.

DURESS – a special right that allows to define in the system a code/card which, if used for

arming/disarming or alarm clearing, will trigger a silent alarm (which is signaled in no

way, but the alarm code is sent to the monitoring station). The alarm will be triggered in

the partition in which alarm would be triggered in the event of tamper of the

keypad/proximity card arm/disarm device used for arming/disarming or alarm clearing.

INT-VG access – the user can operate the control panel by means of a telephone

(DTMF), using the interactive voice menu.

13.3 Functions assigned to keyfob buttons

Functions that can be assigned to the keyfob buttons are numbered, which makes easier

their programming in the keypad (you can also scroll through the list using the and

keys).

In the LED keypad, the function number is presented in binary form on the LEDs 1-12, in the

same way as the decimal values (see: page 10 Table 4). Only values corresponding to the

function numbers can be entered.

0. Not used

1. Zone 1 violation

2. Zone 2 violation

3. Zone 3 violation

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Versa IP Seite 83

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Versa IP

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info