Bedienungsanleitung Satel Versa Plus (Seite 30 von 110) (Englisch)

699394

Zoom out

Zoom in

Vorherige Seite

1/110

Nächste Seite

28 VERSA Plus SATEL

5. The DLOADX program will receive the call automatically or the program operator must

accept establishing communication (which depends on DLOADX settings).

3.4.2 Programming over Ethernet

Communication via Ethernet can be established in one of the following methods:

1. Connection initialized from the DLOADX program. The control panel can be programmed

from any location. If communication takes place in a wide area network, the control panel

must have a public IP address.

2. Connection initialized by the control panel. The control panel can be programmed only

from specified location. This method should be used, when the system user does not

want remote programming to take place without his knowledge. If communication takes

place in a wide area network, the computer with DLOADX program must have a public IP

address.

3. Connection initialized by means of SMS. If communication takes place in a wide area

network, the computer with DLOADX program must have a public IP address.

4. Establishing connection via the SATEL server. The control panel can be programmed

from any location. No public IP address is required for the control panel or the computer

with DLOADX program.

Initiating an Ethernet connection from DLOADX program

Control panel settings:

 enable DLOADX->VERSA-ETHM CONNECTION option (see: “Ethernet communication

module (ETHM)” p. 56),

 program the number of TCP port which will be used for communication and the data

encryption key (see: “Built-in communication modules (VERSA-ETH)” p. 54),

 configure the Ethernet communication module (see: “Ethernet communication module

(ETHM)” s. 56).

DLOADX program settings:

 program the control panel address,

 program the number of TCP port which will be used for communication and the data

encryption key (or select the “LAN: VERSA-ETH” parameter set – the data programmed in

settings of built-in communication modules will be used).

1. Click on the

button in DLOADX program main menu. A drop down menu will be

displayed.

2. Click “TCP/IP: DLOADX -> ETHM” (if you have programmed both sets of parameters for

communication via the Ethernet network, when you hover mouse over “TCP/IP: DLOADX

-> ETHM”, you can select “LAN/WAN” or “LAN”). The “Connection TCP/IP:

DLOADX->ETHM-1” window will be displayed.

3. Click on the “Connect” button in the “Connection TCP/IP: DLOADX->ETHM-1” window.

Connection establishment information will be displayed.

4. When communication is established, the DLOADX program will inform you about it.

Initiating an Ethernet connection by the control panel

Control panel settings:

 program the address of the computer with DLOADX program, the number of TCP port

which will be used for communication and the data encryption key (see: “Built-in

communication modules (VERSA-ETH)” p. 54),

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Versa Plus Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Versa Plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info