Bedienungsanleitung Satel Versa Plus (Seite 46 von 110) (Englisch)

699394

Zoom out

Zoom in

Vorherige Seite

1/110

Nächste Seite

44 VERSA Plus SATEL

12. NO ALARM ACTION – the zone may be used to control the output with function 13. ZONE

VIOLATION

, 15. CONTROLLED or 16. READY STATUS. An additional option enables the zone

to be used for supervision of the key box (KEYBOX CONTROL option).

13. ARM/DISARM – the zone controls the arming status of the partition it belongs to. Violation of

the zone starts the arming procedure or disarms the partition (depending on the current

status of the partition).

14. ARMING – violation of the zone starts the procedure of arming the partition to which the

zone belongs.

15. DISARMING – violation of the zone disarms the partition to which the zone belongs.

16. EXIT DELAY TERMINATOR – violation of the zone ends the partition exit delay countdown.

17. SHUNT LOCK – the zone ends the partition exit delay countdown and – depending on the

BLOCKS VERIFICATION option – will disable verification or disarm the partition to which it

belongs. The way of controlling (the zone violation / zone restore) is determined by the

option RESTORE DISABLES VERIF. or RESTORE DISARMS.

18. ENTRY ROUTE ENABLING – violation of the zone activates delay for the 2. ENTRY/EXIT ROUTE

type zones in the partition to which the zone belongs. The zones will act as delayed ones for

the DELAY ACTIVATION TIME. After expiry of the time, unless the system is disarmed, the

zones will again act as the instant ones. If the DELAY ACTIVATION TIME for a zone will be

programmed as equal to 0, and at the same time the ENTRY DELAY programmed for the

partition is equal to 0, violation of the zone will have no effect.

19. TROUBLE – violation of the zone is treated by the control panel as a trouble. Additionally,

an alarm event may be written into the control panel memory (see: EVENT parameter).

6.6 Zone options

Alarm on exit delay end – when the option is enabled, if the zone is violated at the

moment of ending the exit delay countdown, it will trigger an alarm (if this option is

disabled, the zone will only trigger the alarm when the status changes from normal

to violation during the armed mode).

Priority – if the option is enabled, arming is impossible when the zone is violated.

Bypass disabled – if the option is enabled, the user cannot bypass the zone.

Active in night arm – if the option is enabled, the zone is armed when the night armed mode

is activated.

Active in day arm – if the option is enabled, the zone is armed when the day armed mode is

activated.

Power-up delay – if the option is enabled, the zone is bypassed for 120 seconds after

power supply is turned on (this will prevent triggering false alarms e.g. during start-up

of the control panel).

Warning in partial arming – if the option is enabled and the partition is set to day or night

arm mode, the zone will trigger a warning alarm. It can be signaled in the keypad, in the

proximity card arm/disarm device or at the 2. INTERNAL SIREN function output. It is not

reported to the monitoring station. If you do not disarm the system during the warning

alarm, the zone will trigger a burglary alarm (see: parameter WARNING TIME p. 38).

Warning alarm in the partial armed mode will work irrespective of the WARNING ALARM

global option, which refers to the delay of loud signaling and reporting if any mistakes

are made when entering into the protected facility.

Warning on internal sirens – if the option is enabled, warning alarm in the partial armed

mode is signaled on the output with the 2. INTERNAL SIREN function.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel Versa Plus Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel Versa Plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info