1. Selectable air pressure units: Hpa/Mb or inHg.
2. Record the air pressure data of past 12 hours.
3. It compares the data of sampling air pressure with that of last time every hour, if the change is more than 2Hpa, the arrow of air
pressure will change.
4. Process the effective sampling data of every hour, then display the weather icons according to the result processed.There are 5
weather states: Sunny, Slightly Cloudy, Cloudy, Rainy, Cloudburst.
Temperature Alert Mode
1. Click “ALERT” key to switch temperature alert on/off. The 2 arrows of alert will display on the LCD when the temperature alert is
switched on.
2. Hold “Alert” for 2 seconds to enter temperature alert setting. Click “CHANNEL” Key to choose the setting channel confirm the
channel and click “UP” and “DOWN”Key to set the maximum of the temp. Confirm the maximum and click“▲” or “▼”Key to
set the minimum of the temp. Confirm the minimum and exit.
3. During the setting, the items and relative symbols flash in the frequency of 2 Hz.
4. During the setting, if there is no any operation of keys, it will exist the setting state, if hold“UP”and“DOWN”Key for more than 2
seconds for quick adjusting operation, the items were set will stop flashing.
5. The default values of temp. alert is 50°C (Max) and 0°C (Min) for indoor sensor, and 70°C (Max) and -50°C (Min) for RF sensor.
6. The limit of the temp setting: the Min of alert temp should be 1 °C lower than the Max.
7. When the temperature alerts of that Channel is triggered, the temperature value and alert icon will flash. Only the alert icon flashes if
the alert is not on the current channel.
8. When the IN / OUT temperatures are entering the alert state at the same time, the corresponding values and icons will flash together.
9. Under the alert state, click any key to cancel the alert sound, then click “Alert” key to switch off the alert, then the symbol of alert
disappears, when the temperature alert and the time alarming coincide, the alarm has the priority.
10. When the temperature alert is ringing, the corresponding temperature values and alert icons will flash in the frequency of
1Hz/second.
11. The sound of temperature alert: it rings 4 Beeps/second for 5 seconds and then stop for 55 seconds. It will repeat automatically until
the following conditions occur: 1). any keys clicked to stop the temperature alert or the current temperature is beyond the range of alert
temp set.
12. Press any key to stop the temp.alert.
