Bedienungsanleitung Saxon SA6033 (Seite 5 von 10) (Englisch)

535756

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

 Press again to check the min value, the display will continue for 20 seconds. Press again back to normal display.

 When display max or min, hold MAX / MIN for 2 seconds to clear the present memory of max/min value and then back to the normal display mode.

4.3/ TIME SETTING

 In normal mode, hold ”MODE for more than 2 seconds into time setting.

 Time setting order: hour→ minute →year（2000-2099 year）→month date / date month→12/24H  exit

 The setting item will twinkling at a frequency of 1HZ.

 Press MODE to confirm the setting and turn to next setting item.

 Press “+/℃/℉”once to ahead one step, hold more than 2 seconds to ahead by 8 steps/ second.

 Press “-/RCC”once to back one step, hold more than 2 seconds to back by 8 steps/ second.

 Without any effective handling more than 20 seconds, will exit setting automatically.

4.4/ ALARM SETTING

 1. Hold MODE more than into ALARM setting.

 2. Setting order: ALARM hour ALARM minute exit.

 3. When setting, the setting item will twinkling at a frequency of 1HZ.

 4. Press MODE to confirm the setting item and turn to next setting.

 5. Press “+/℃/℉”once to ahead one step, hold more than 2 seconds to ahead by 8 steps/ second.

 6. Press “-/RCC”once to back one step, hold more than 2 seconds to back by 8 steps/ second.

 7. Without any effective handling more than 20 seconds, will exit setting automatically.

 8. When into alarm setting, the alarm will be on automatically.

4.5/ TEMPERATURE ALERT SETTING

 Press “ALERT” to on/ off temperature alert.

 Hold “ALERT” more than 2 seconds into alert setting.

 Setting order: upper limitlower limit exit, in the setting mode, press CHANNEL to select the channel of outdoor temperature alert.

 Default upper limit of indoor temperature is 60°C (122 °F) and outdoor temperature is 70°C (158 °F) , the lower limit is: indoor -10°C (14 °F), outdoor -40°C(-40 °F).

 When setting, the setting item will twinkling at a frequency of 1HZ.

 Press “ALERT” to confirm setting item and turn to next setting.

 Press “+/°C/°F”once to ahead one step, hold more than 2 seconds to ahead by 8 steps/ second.

 Press “-/RCC”once to back one step, hold more than 2 seconds to back by 8 steps/ second.

 Without any effective handling more than 20 seconds, will exit setting automatically.

 When into alert setting, the alert will be on automatically.

4.6/ PRESSURE SETTINGS

 In normal mode, press “HISTORY” once to check record of pressure in the past 12 hours.

 Hold “HISTORY” more than 2 seconds into relative setting of weather.

 Setting order:

Select LOCAL weather state unit option (mb hpa or inHg) exit.

Select SEA LEVEL  weather state  unit option (mb hpa or inHg)  sealevel setting exit.

 When setting, the setting item will twinkling at a frequency of 1HZ.

 Press “HISTORY”to confirm setting item and turn to next setting.

 Press “+/°C/°F”once to ahead one step, hold more than 2 seconds to ahead by 8 steps/ second.

 Press “-/RCC”once to back one step, hold more than 2 seconds to back by 8 steps/ second.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Saxon SA6033 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info