Bedienungsanleitung Scan 41 (Seite 9 von 28) (Englisch)

745565

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

NAVN:

STI:

DIMENSION:

MATERIALE:

DATO:

SIGN:

Krog Iversen & Co A/S

DK-5492 Vissenbjerg

TG.NR:

EMNE:

C:\Working Folder\Designs\Scan 64\90064051.idw

90064051

Frisklufttilførsel

29-08-12

Scan 64

VÆGT:

AREAL:

N/A

External

combustion air

through the ﬂoor

External

combustion air

through the wall

Remove the cover plate at the back of the stove or the

cover plate at the bottom of the wood compartment

store, as shown in "Fitting the ﬂue connection piece in

the top outlet". Connect outside air to the connection

piece underneath the combustion chamber.

EXISTING CHIMNEY AND PRE-FABRICATED ELEMENT CHIMNEY

If you intend to connect your stove to an existing chimney, it makes sense to contact an authorised Scan dealer, or a local chim-

ney sweep, for advice. These experts will also let you know if your chimney needs renovating.

¬ When connecting a pre-fabricated element chimney, follow the manufacturer’s connection instructions for the

relevant chimney type.

CONNECTION BETWEEN BUILT-IN STOVE AND STEEL CHIMNEY

Your Scan dealer, or local chimney sweep, can advise you on choosing a make and type of steel chimney. This ensures that the

chimney will match your wood-burning stove.

REQUIREMENTS FOR CHIMNEY

The chimney must have a minimum internal diameter of 148 mm and have a T400 designation, with G for the soot ﬁre test.

The requirements to the chimney and the ﬂue pipe in terms of safety distances must be met.

¬ Choosing the wrong length or diameter of steel chimney could impair functionality.

¬ Always comply exactly with the instructions provided by the steel chimney supplier.

POSITIONING THE STOVE AT A NON-FLAMMABLE WALL

There are no demands concerning the distance to non-ﬂammable materials, but we recommend a distance of 50 mm in order to

facilitate the cleaning of the stove, the ﬂue pipes and the chimney and to prevent possible damages to the wall.

DISTANCE TO FURNITURE

Distance to furniture from glass: 1000 mm.

You should however assess whether furniture or other items might become excessively dry due to being too close to the stove.

CLOSED COMBUSTION SYSTEM

You should use the closed combustion system for the wood-burning stove if you live in a newly-built, airtight home.

External combustion air is connected through a ventilation pipe via the wall or ﬂoor.

It must be possible to shut off the ventilation pipe with a valve, when the stove is not in use. Minimum

Ø 100 mm ventilation pipe,

maximum length: 6 metres with a maximum of one bend. We recommend smooth steel pipes.

We recommend mounting a valve in the ventilation pipe in order to avoid condensate in the stove and the pipe system, when the

stove is not in use. It can also be an advantage to insulate the ventilation pipe.

The connecting piece for fresh air inlet is delivered separately with the stove.

If you want external combustion air via a wall, remove the cover plate at the rear

of the stove with a pair of cutting pliers.

NOTE: if the stove has a fresh air connexion or closed combustion,

the ventilation pipe must be open, when the stove is in use!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scan 41 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Scan 41

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info