Bedienungsanleitung Scan 85 (Seite 10 von 28) (Englisch)

745592

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

ASSEMBLY

Load bearing foundation

The stoves of the Scan 85 series weigh from 204 kg to 220 kg. You

should therefore make sure that the foundation can bear the weight

of the wood-burning stove and that of the chimney.

Floor plate

If you are setting up the stove on a flammable floor, observe national

and local regulations on the size of the non-flammable foundation

that covers the floor around the stove.

Your local Scan dealer can advise you on regulations concerning

flammable materials in the vicinity of your stove.

The idea behind the floor plate is that it protects the floor and flam-

mable material against sparks.

The floor plate can be made of steel or glass, and the stove can be set

up on brick, natural stone or similar materials.

This Scan wood-burning stove has an integrated floor plate, and

can thus be set up on any flammable material without a protective

foundation.

Small shaped floor plate for the Scan 85 series

Existing chimney and pre-fabricated element

chimney

If you intend to connect your stove to an existing chimney, it makes

sense to contact an authorised Scan dealer, or a local chimney sweep

for advice. These experts will also let you know if your flue needs

renovating.

When connecting a pre-fabricated element chimney, follow the

manufacturer’s connection instructions for the relevant chimney

type.

Connection between stove and steel chimney

Your Scan dealer, or local chimney sweep, can advise you on choosing

a make and type of steel chimney. This ensures that the chimney will

match your wood-burning stove.

Requirements for chimney

The chimney must have a minimum internal diameter of 148 mm

and have a T400 designation, with G for the soot fire test.

As a general rule, the length of the chimney should not be less than

4 metres, measured from the top of the stove. Specific weather or

installation conditions might require a different length.

The requirements to the chimney and the flue pipe in terms of safety

distances must be met.

Choosing the wrong length or diameter of steel chimney could

impair functionality.

Always comply exactly with the instructions provided by the steel

chimney supplier.

Connection with 90° elbow pipe

If you opt to connect the stove with an elbow pipe, you should use a

curved elbow, as this gives a better draught.

If you connect the stove with a sharp elbow pipe, the cleansing lid

must be placed in the vertical part so that the horizontal part can be

cleaned through here.

NAVN:

STI:

DIMENSION:

MATERIALE:

DATO:

SIGN:

Krog Iversen & Co A/S

DK-5492 Vissenbjerg

TG.NR:EMNE:

C:\Working Folder\Designs\Scan85\90585009.idw

90585009

Scan 85 med knærør

27-02-2018

Ken

Scan 85

VÆGT:

AREAL:

N/A

NAVN:

STI:

DIMENSION:

MATERIALE:

DATO:

SIGN:

Krog Iversen & Co A/S

DK-5492 Vissenbjerg

TG.NR:EMNE:

C:\Working Folder\Designs\Scan85\90585007.idw

90585007

Scan 85 med lille formgulvplade

22-02-2011

Scan 85

VÆGT:

AREAL:

N/A

NAVN:

STI:

DIMENSION:

MATERIALE:

DATO:

SIGN:

Krog Iversen & Co A/S

DK-5492 Vissenbjerg

TG.NR:EMNE:

C:\Working Folder\Designs\Scan85\90585008.idw

90585008

Scan 85 med stor formgulvplade

26-02-2018

Scan 85

VÆGT:

AREAL:

N/A

Large shaped floor plate in steel

or large base floor plate in glass

for the Scan 85 series

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scan 85 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Scan 85

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info