Bedienungsanleitung Scansonic S6 (Seite 2 von 4) (Englisch)

638477

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

SCANSONIC

H I F I L O U D S P E A K E R S

Introduction

Thank you for choosing Scansonic loudspeakers, we hope they

will bring you many years of enjoyment.

Please read this manual fully before unpacking and installing

the product.

Carton contents

We have during production and packing carefully checked and

inspected these loudspeakers.

After unpacking please check for any damage from transport.

We recommend that you keep the original cartonbox and

packing material for any future shipping.

In the cartonbox you will ﬁnd:

1 Bracket for flat wall mounting

8 Self-adhesive rubber pads.

Loudspeaker installation

Brackets are enclosed and horisontal or vertical wall mounting

is optional and offers opportunity for optimising the sound

to your room.

If you place the loudspeakers on a shelf or furniture unit, the

enclosed adhesive pads may be attached under the cabinet

and will protect from unwanted resonances and from scratches.

Loudspeaker positioning

Variations in placement of your loudspeakers can produce

dramatic differences in the way music sounds. No listening

rooms are the same and therefore we encourage you to spend

some time experimenting with which placements work best in

your listening room. Trust your ears and be willing to experiment

freely. You can start with our basic recommendations.

To begin with, the centre loudspeaker should be positioned

horisontal directly under your TV.

Home Theatre Systems

Scansonic S4 can be used as centre channel in a surround

sound home theatre system.

Positioning the centre loudspeaker close to your TV will create

the best sound image in scale with the visual image.

If Scansonic S4 are to be used for reproducing the surround

channels in a multi channel home theatre system, we suggest

you place them as illustrated in Figures 2 to 5 depending on the

number of channels.

Magnetic interference

Scansonic S6 tweeter and woofer drive units are magnetically

shielded ensuring that the magnetic field outside the cabinet,

except the front, is too low to cause distortion of the TV picture,

and you can place the loudspeakers as close to the TV screen

as possible without causing visual interference or electro-

magnetic interference with the TV.

Because of the higher magnetic field in front of the

loudspeakers, all magnetically sensitive articles (audio and

video tapes, computer discs etc) should be kept at least 0,3

metre away from the front of the loudspeaker.

Connecting your loudspeakers

We recommend that you read the manual of your amplifier or

av-receiver carefully before connecting your loudspeaker.

Please switch off all equipment when connecting your

loudspeaker.

The binding posts on the terminal accepts wire up to Ø 4mm or

cables with bananaplugs.

Make sure that positive terminal binding posts on the speaker

(marked + and coloured red) are connected to the positive

output terminal binding posts on the amplifier and that the

negative terminals on the speaker (marked – and coloured

black) are connected to the negative output terminal on the

amplifier. See fig 5.

You are now ready to enjoy your Scansonic S6 loudspeaker...!

Owner ’s manual

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scansonic S6 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Scansonic S6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info