Bedienungsanleitung Schaub Lorenz 32LT33 10071239 (Seite 54 von 146) (Deutsch, Englisch, Französisch, Italienisch)

548569

Zoom out

Zoom in

Vorherige Seite

1/146

Nächste Seite

English - 53 -

Inserting Batteries into the

Remote Control Handset

• Remove the battery cover located on the back of

the handset by gently pulling backwards from the

indicated part.

• Insert two AAA/R3 or equivalent type batteries

inside. Observe the correct polarity (+/-) when

inserting batteries and replace the battery cover.

Note : Remove the battery from remote control handset when

it is not to be used for a long period. Otherwise it can be

damaged due to any leakage of batteries.

Switching the TV On/Off

To Switch the TV On

• Connect the power cord to the 220-240V AC, 50

Hz.

• Press STANDBY switch. Then the standby LED

lights up.

• To switch on the TV from standby mode either:

• Press the “

” button, P+ / P- or a numeric button

on the remote control.

• Press the -P/CH or P/CH+ button on the TV. The TV

will then switch on.

Note: If you switch on your TV via standby button on the

remote control, the programme/source that you were

watching last will be reselected.

By either method the TV will switch on.

To Switch the TV Off

• Press the “ ” button on the remote control or

press the STANDBY switch, so the TV will switch

to standby mode.

• To power down the TV completely, unplug the

power cord from the mains socket.

Note: When the TV is switched to standby mode,

standby LED can blink to indicate that features such

as Standby Search, Over Air Download or Timer is

active.

Input Selection

Once you have connected external systems to your TV,

you can switch to different input sources.

• Press “SOURCE” button on your remote control for

directly changing sources.

• Select “Source” option from the main menu by

using “

” or “ ” button. Use then “ ” or

“ ” button to highlight an input and press “ ” button

to select.

Note : You can mark desired source options by pressing the

OK button. Therefore, when

“SOURCE” button is pressed,

only the marked source options will be available (except for

the TV source).

Basic Operations

You can operate your TV using both the remote

control and onset buttons.

Operation with the Buttons on the TV

Volume Setting

• Press “ ” button to decrease volume or “

” button to increase volume, so a volume level scale

(slider) will be displayed on the screen.

Programme Selection

• Press “ P/CH + ” button to select the next programme or

“ P/CH - ” button to select the previous programme.

Viewing Main Menu

• Press “ ”/ “ ” buttons at the same time

to view main menu. In the Main menu select sub-

menu using “ P/CH - ” or “ P/CH + ” buttons and enter

the sub-menu using “

” or “ ” buttons.

To learn the usage of the menus, refer to the menu

system sections.

AV Mode

• Press the “ TV/AV ” button in the control panel on the

TV to switch between AV modes.

02_MB45M_[GB]_3920UK_IDTV_NICKEL12_32875W_10071239_50180337.indd 5302_MB45M_[GB]_3920UK_IDTV_NICKEL12_32875W_10071239_50180337.indd 53 20.11.2010 10:10:2220.11.2010 10:10:22

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Schaub Lorenz 32LT33 10071239 Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info