Bedienungsanleitung Schaub Lorenz 32LT33 10071239 (Seite 62 von 146) (Deutsch, Englisch, Französisch, Italienisch)

548569

Zoom out

Zoom in

Vorherige Seite

1/146

Nächste Seite

English - 61 -

Use “ ” or “ ” buttons to highlight the menu item

that will be adjusted and then press “ ” or “ ” button

to set.

Notes:

• System Language determines the on-screen menu

language.

• Audio Language is used for selecting the soundtrack

of a channels.

• Primary settings are the ﬁrst priority when multiple

choices are available on a broadcast. Secondary

settings are the alternatives when the ﬁrst options

are not available.

Installation

The Installation menu is mainly intended to help you

for creating a Channel Table in the most efﬁ cient way.

Select Installation from the Conﬁ guration menu by

pressing “ ” or “ ” buttons.

This menu includes the following items:

(*) For Denmark, Sweden, Norway or Finland.

Automatic Channel Scan

Automatic channel scan is started by pressing

“OK” button while Automatic channel scan item is

highlighted.

The following message appears on the screen:

Highlight Yes or No by using “ ” or “ ” buttons and

press “OK” button to conﬁ rm.

If Yes is selected, automatic search starts.

Selecting No cancels automatic search.

After search is completed for digital channels, a

message asking whether to search for analogue

channels appears on the screen:

Press the “OK” button to search for analogue

channels. The following menu appears on the screen

for analogue channel search:

Select your Country , Language and Text language

by using “ ” or “ ” and “ ” or “ ” buttons. Press

“OK” or RED button to continue. To cancel, press

BLUE button. The following menu will be displayed

during the automatic tuning:

After APS is ﬁ nalized, the programme table will appear

on the screen. In the programme table you will see

the programme numbers and names assigned to the

programmes.

Manual Channel Scan

In manual channel scan, the number of the multiplex is

entered manually and only that multiplex is searched

for the channels. For each valid channel number, signal

level and signal quality are shown on the screen.

In both manual and auto search any existing channel

in the database is not re-stored to avoid redundant

duplicates of that channel.

Clear Service List (*)

(*) This setting is visible only when the Country option

is set to Denmark, Sweden, Norway or Finland.

Use this setting to clear channels stored. Press “

” or “ ”

button to select Clear Service List and then press OK. The

following OSD message will be displayed on the screen:

Press OK to cancel. Select Yes by pressing “ ” or “ ”

button and press OK to delete all of the channels.

First Time Installation

The user can use this item to load default settings,

which were loaded to the receiver at the factory.

To install factory settings, highlight “First Time

Installation” menu item and press “OK” button,

02_MB45M_[GB]_3920UK_IDTV_NICKEL12_32875W_10071239_50180337.indd 6102_MB45M_[GB]_3920UK_IDTV_NICKEL12_32875W_10071239_50180337.indd 61 20.11.2010 10:10:2620.11.2010 10:10:26

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Schaub Lorenz 32LT33 10071239 Seite 62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info