Bedienungsanleitung Schaub Lorenz 32LT655C (Seite 59 von 85) (Deutsch, Englisch)

548579

Zoom out

Zoom in

Vorherige Seite

1/85

Nächste Seite

English - 58 -

Basic Operations

You can operate your TV using both the

remote control and onset buttons.

Operation with the Buttons on the TV

Volume Setting

• Press “ ” button to decrease volume or

button to increase volume, so a volume level scale

(slider) will be displayed on the screen.

Programme Selection

• Press “P/CH +” button to select the next programme or

“P/CH -” button to select the previous programme.

Viewing Main Menu

• Press “ ” and “ ” buttons at the same

time to view main menu. In the main menu select

sub-menu using “P/CH -” or “P/CH +” buttons and

enter the sub-menu using “ ” or “ ”

buttons. To learn the usage of the menus, refer to

the menu system sections.

AV Mode

• Press the “TV/AV” button in the control panel on the

TV to switch between AV modes.

Operation with the Remote Control

• The remote control of your TV is designed to control

all the functions of the model you selected. The

functions will be described in accordance with the

menu system of your TV.

• Functions of the menu system are described in the

following sections.

Volume Setting

• Press “V -” button to increase the volume. Press “V

+” button to decrease the volume. A volume level

scale (slider) will be displayed on the screen.

Programme Selection (Previous or Next

Programme)

• Press “P -” button to select the previous

programme.

• Press “P +” button to select the next programme.

Programme Selection (Direct Access)

• Press numeric buttons on the remote control to select

programmes between 0 and 9. The TV will switch

to the selected programme. To select programmes

between 10 - 1000 (for IDTV) or 10-199 (for

analogue), press the numeric buttons consecutively.

Press directly the programme number to reselect

single digit programmes.

Initial Settings

When the TV is turned on for the  rst time, the menu

for the language selection appears on the screen. The

message “Welcome please select your language!”

is displayed in all language options sequentially in

the OSD.

By pressing the “ ” or “ ” buttons highlight the language

you want to set and press OK button.

You can get information about the menu usage by

pressing “INFO” button. Press “INFO” button again

to exit the help menu.

After then, “First time installation” OSD will appear

on the screen. By pressing “ ” or “ ” buttons, select

the country you want to set and press OK button.

Note: Country selection will not be available for UK.

Press OK to continue.

After then, the active antenna selection OSD appears

on the screen:

By pressing “ ” or “ ” buttons, set active antenna

mode as on or off.

If an active antenna is connected to your TV, you can

select this option as On. Antenna power should be

“Off” when standard antenna is used instead of the

active antenna. See “Con guration Menu” in the

following sections for more information.

Press OK button on the remote control to continue

and the following message will be displayed on the

screen:

• To select the “Yes” or “No” option, highlight the item

by using “ ” or “ ” buttons and press OK button.

After then, the following OSD will be displayed on

the screen:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Schaub Lorenz 32LT655C Seite 59

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info