Bedienungsanleitung Schaub Lorenz 32LT655C (Seite 69 von 85) (Deutsch, Englisch)

548579

Zoom out

Zoom in

Vorherige Seite

1/85

Nächste Seite

English - 68 -

After factory settings are loaded, “First Time

Installation” menu will be displayed.

The menu which is displayed for language selection

appears on the screen at  rst. By using “ ” or “

” buttons, select the desired language option,

and press OK button to activate. After then, “First

time installation” OSD will appear on the screen.

By pressing “ ” or “ ” buttons, select the Country

you want to set and press OK button (* only for EU

countries). Next, active antenna mode selection OSD

will appear on the screen. Use “ ” or “ ” to set and

press OK to continue. See the section, “Initial Settings”

for more information. After active antenna mode option

is selected, a message asking for automatic search

appears on the screen:

Highlight “Yes” item by pressing “ ” or “ ” buttons

and press OK button to start installation. • To select

the “Yes” or “No” option, highlight the item by using “

” or “ ” buttons and press OK button.

After then, the following OSD will be displayed on

the screen:

If you select CABLE option, the following screen will

be displayed:

You can select frequency ranges from this screen. For

highlighting lines you see, use “ ” or “ ” button. You

can enter the frequency range manually by using the

numeric buttons on the remote control. Set Start and

Stop Frequency as desired by using numeric buttons

on the remote control. After this operation, you can set

Search Step as 8000 KHz or 1000 KHz. If you select

1000 KHz, the Tv will perform search process in a

detailed way. Searching duration will thus increase

accordingly. When  nished, press OK button to start

automatic search. Automatic searching screen will be

displayed during the process.

Note: If you select an extended gap between Start

and Stop frequency rate, automatic search duration

will take a longer time.

If you select AERIAL option from the Search Type

screen, the digital television will search for digital

terrestrial TV broadcasts:

The IDTV will automatically tune to the UHF or VHF

(** for EU countries) transmission channels, searching

for digital terrestrial TV broadcasts and displaying the

names of channels found. This process will take about

a few minutes. To cancel searching, you can press the

“MENU” button at any time during the process.

Note: If the digital TV fails to store any channels, “No

channels available.” message will be displayed on

the screen.

Either you select AERIAL or CABLE option from the

search type menu, after the digital automatic search

is completed, the following message asking for

analogue channel search appears on the screen:

Operation of analogue channel installation is explained

previously in “Initial Installation” section.

Media Browser (in DTV mode)

Whenever you plug a USB  ash disk to your TV, the

following message will be displayed on the screen:

Select YES or NO by pressing “ ” or “ ” button and

“OK” button to continiue.

You can also select Media Browser item from the

main menu by using “ ” or “ ” buttons. Press OK to

view Media Browser contents. You can play audio

and photo and video (optional)  les from a USB

 ash disk.

Note: Some USB compliant devices may not be

supported.

Note: Movie Sense and Pixellence features cannot

be set while in Media Browser mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Schaub Lorenz 32LT655C Seite 69

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info