Bedienungsanleitung Schaub Lorenz 46LE6900CT (Seite 82 von 94) (Deutsch, Englisch)

491225

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

English - 81 -

Select • Sources in the Settings menu and press

OK button.

Press“•

” or “ ” buttons to select a source.

Use “•

” or “ ” button to enable or disable the

selected source. Changes are automatically

stored.

Conﬁ guring Satellite Settings

Select Satellite settings in the Settings menu to

conﬁ gure satellite settings. Press OK button.

Satellite List: To view available satellite list, please

select Satellite list option from satellite settings menu.

If you want to add new satellite information, please

press YELLOW button. If you want to change satellite

name, please use the navigation buttons. To delete

a satellite from list, press BLUE button or press OK

to edit.

Antenna Installation: In this section, you can

change antenna settings and scan satellite for new

channels.

SatcoDX (optional): You can perform SatcoDX

operations using the Satelite Settings. On SatcoDX

menu, there are two options regarding to satcodx

feature as in the following:

You can download or upload satcoDX data. In order

to perform these functions supported for satcodx

feature, a USB device must be connected to the TV

in the ﬁ rst place.

You will be able to upload current services and related

satellites & transponders in TV, to a USB device with

a ﬁ le named “mb70_sdx.sdx “.

In addition to the uploading feature you will be

able to download one of the satcodx ﬁ les stored in

USB device, to the TV. When download option is

selected, a list of satcodx ﬁ les stored in USB device

will displayed.

When you select one of these satcodx files, all

services and related satellites and transponders in

the selected ﬁ le will be stored in TV. If there are any

installed terrestrial, cable and/or analog services,

they will be kept and only satellite services will be

removed.

Afterwards, check your antenna settings and make

changes if necessary. An error message stating “No

Signal” may be displayed if antenna settings are not

conﬁ gured properly.

Conﬁ guring Network Settings

Note: Your TV’s Network Settings include Wired

and Wireless Connection options. However, if your

TV does not have USB Wi-Fi dongle, you should

use Wired Connection type. If you try to connect via

Wireless Connection when your TV does not have a

USB Wi-Fi dongle, a warning screen will appear and

the TV will not get an IP address. Try connecting the

LAN cable after this and then the TV will be able to

get an IP address.

Conﬁ guring Wired Device Settings

On • Network Settings window you can set network

type of the TV set, which connects the TV to

the Internet. If you are connecting the TV via

ETHERNET INPUT, select Network Type as Wired

Device to conﬁ gure.

Setting Network Type

Network type can be selected as • Wired or Wireless

device, in accordance with the active connection

to the TV set. Select this as Wired if you have

connected to the TV a LAN cable. Select as Wireless

if you connect via the wireless USB dongle.

Setting Conﬁ guration Status

This section displays the status of the connection. •

Select Connected if you want to activate Wired or

Wireless connection. Select as Not Connected to

quit an active connection.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Schaub Lorenz 46LE6900CT Seite 82

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info