Bedienungsanleitung Schaub Lorenz LT22-356 DB (Seite 50 von 93) (Deutsch, Englisch, Türkisch)

548639

Zoom out

Zoom in

Vorherige Seite

1/93

Nächste Seite

English - 49 -

In the configuration menu, highlight the Language Settings

item by pressing “ ” or “ ” buttons. Press “OK” and

Language Settings submenu will be displayed on the

screen:

Use “

” or “ ” buttons to highlight the menu item that will

be adjusted and then press “ ” or “ ” button to set.

Notes:

• System Language determines the on-screen menu

language.

• Audio Language is used for selecting the soundtrack

of a channels.

• Primary settings are the ﬁrst priority when multiple

choices are available on a broadcast. Secondary

settings are the alternatives when the ﬁrst options are

not available.

Installation

The Installation menu is mainly intended to help you for

creating a Channel Table in the most efficient way. Select

Installation from the Configuration menu by pressing “

” or “ ” buttons.

This menu includes the following items:

(*) For Denmark, Sweden, Norway or Finland.

Automatic Channel Scan

Automatic channel scan is started by pressing “OK” button

while Automatic channel scan item is highlighted.

The following message appears on the screen:

Highlight Yes or No by using “ ” or “ ” buttons and press

“ OK” button to confirm.

If Yes is selected, automatic search starts.

Selecting No cancels automatic search.

After search is completed for digital channels, a message

asking whether to search for analogue channels appears

on the screen:

Press the “OK” button to search for analogue channels.

The following menu appears on the screen for analogue

channel search:

Select your Country , Language and Text language by

using “ ” or “ ” and “ ” or “ ” buttons. Press “OK” or

RED button to continue. To cancel, press BLUE button. The

following menu will be displayed during the automatic

tuning:

After APS is finalized, the programme table will appear

on the screen. In the programme table you will see

the programme numbers and names assigned to the

programmes.

Manual Channel Scan

In manual channel scan, the number of the multiplex is entered

manually and only that multiplex is searched for the channels.

For each valid channel number, signal level and signal quality

are shown on the screen.

In both manual and auto search any existing channel in the

database is not re-stored to avoid redundant duplicates

of that channel.

Clear Service List (*)

(*) This setting is visible only when the Country option is

set to Denmark, Sweden, Norway or Finland.

Use this setting to clear channels stored. Press “

” or “ ” button

to select Clear Service List and then press OK. The following OSD

message will be displayed on the screen:

Press OK to cancel. Select Yes by pressing “ ” or “ ” button

and press OK to delete all of the channels.

First Time Installation

The user can use this item to load default settings, which

were loaded to the receiver at the factory.

02_MB45_[GB]_1055UK_IDTV_BRONZE11_22855W_10065354_50156390.indd 4902_MB45_[GB]_1055UK_IDTV_BRONZE11_22855W_10065354_50156390.indd 49 28.09.2009 17:59:1928.09.2009 17:59:19

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Schaub Lorenz LT22-356 DB Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info