Bedienungsanleitung Scheppach AB1600 (Seite 38 von 312) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

781659

Zoom out

Zoom in

Vorherige Seite

1/312

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

38 | GB

f) If operating a power tool in a damp lo-

cation is unavoidable, use a residual

current device (RCD) protected sup-

ply. Use of an RCD reduces the risk of

electric shock.

3. Personal safety

a) Stay alert, watch what you are doing

and use common sense when operat-

ing a power tool. Do not use a power

tool while you are tired or under the

inuence of drugs, alcohol or medi-

cation. A moment of inattention while

operating power tools may result in

serious personal injury.

b) Use personal protective equipment.

Always wear eye protection. Protec-

tive equipment such as dust mask,

non-skid safety shoes, hard hat, or

hearing protection used for appropri-

ate conditions will reduce personal

injuries.

c) Prevent unintentional starting. Ensure

the switch is in the off position before

connecting to power source and/or

battery pack, picking up or carrying

the tool. Carrying power tools with

your nger on the switch or energising

power tools that have the switch on in-

vites accidents.

d) Remove any adjusting key or wrench

before turning the power tool on. A

wrench or a key left attached to a ro-

tating part of the power tool may result

in personal injury.

e) Do not overreach. Keep proper footing

and balance at all times. This enables

better control of the power tool in un-

expected situations.

1. Work area safety

a) Keep work area clean and well lit. Clut-

tered or dark areas invite accidents.

b) Do not operate power tools in explo-

sive atmospheres, such as in the pres-

ence of ammable liquids, gases or

dust. Power tools create sparks which

may ignite the dust or fumes.

c) Keep children and bystanders away

while operating a power tool. Distrac-

tions can cause you to lose control..

2. Electrical safety

a) Power tool plugs must match the out-

let. Never modify the plug in any way.

Do not use any adapter plugs with

earthed (grounded) power tools. Un-

modied plugs and matching outlets

will reduce risk of electric shock.

b) Avoid body contact with earthed or

grounded surfaces, such as pipes,

radiators, ranges and refrigerators.

There is an increased risk of elec-

tric shock if your body is earthed or

grounded.

c) Do not expose power tools to rain or

wet conditions. Water entering a pow-

er tool will increase the risk of electric

shock.

d) Do not abuse the cord. Never use the

cord for carrying, pulling or unplugging

the power tool. Keep cord away from

heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase

the risk of electric shock.

e) When operating a power tool out-

doors, use an extension cord suitable

for outdoor use. Use of a cord suita-

ble for outdoor use reduces the risk of

electric shock.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach AB1600 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Scheppach AB1600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info