Bedienungsanleitung Scheppach BS3000 Primaster (Seite 33 von 44) (Deutsch, Englisch, Französisch)

782175

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

33FR

11 Secure the workpiece

–Use the clamping devices or a vice to hold the

workpiece in place. In this manner, it is held

more securely than with your hand.

–An additional support is necessary for long

workpieces (table, trestle, etc.) in order to pre-

vent the machine from tipping over.

–Always press the workpiece rmly against

the working plate and stop in order to prevent

bouncing and twisting of the workpiece.

12 Avoid abnormal posture

–Make sure that you have secure footing and

always maintain your balance.

–Avoid awkward hand positions in which a sud-

den slip could cause one or both hands to come

into contact with the saw blade.

13 Take care of your tools

–Keep cutting tools sharp and clean in order to

be able to work better and more safely.

–Follow the instructions for lubrication and for

tool replacement.

–Check the connection cable of the electric tool

regularly and have it replaced by a recognised

specialist when damaged.

–Check extension cables regularly and replace

them when damaged.

–Keep the handle dry, clean and free of oil and

grease.

14 Pull the plug out of the outlet

–Never remove loose splinters, chips or jammed

wood pieces from the running saw blade.

–During non-use of the electric tool or prior to

maintenance and when replacing tools such as

saw blades, bits, milling heads.

–When the saw blade is blocked due to abnormal

feed force during cutting, turn the machine off

and disconnect it from power supply. Remove

the work piece and ensure that the saw blade

runs free. Turn the machine on and start new

cutting operation with reduced feed force.

15 Do not leave a tool key inserted

–Before switching on, make sure that keys and

adjusting tools are removed.

16 Avoid inadvertent starting

–Make sure that the switch is switched off when

plugging the plug into an outlet.

17 Use extension cables for outdoors

–Only use approved and appropriately identied

extension cables for use outdoors.

–Only use cable reels in the unrolled state.

18 Remain attentive

–Pay attention to what you are doing. Remain

sensible when working. Do not use the electric

tool when you are distracted.

19 Check the electric tool for potential damage

–Protective devices and other parts must be

carefully inspected to ensure that they are fault-

free and function as intended prior to continued

use of the electric tool.

–Check whether the moving parts function

faultlessly and do not jam or whether parts are

damaged. All parts must be correctly mounted

and all conditions must be fullled to ensure

fault-free operation of the electric tool.

–The moving protective hood may not be xed

in the open position.

–Damaged protective devices and parts must be

properly repaired or replaced by a recognised

workshop, insofar as nothing different is spe-

cied in the operating manual.

–Damaged switches must be replaced at a cus-

tomer service workshop.

–Do not use any faulty or damaged connection

cables.

–Do not use any electric tool on which the switch

cannot be switched on and off.

20 ATTENTION!

–The use of other insertion tools and other ac-

cessories can entail a risk of injury.

21 Have your electric tool repaired by a qualied

electrician

–This electric tool conforms to the applicable

safety regulations. Repairs may only be perfor-

med by an electrician using original spare parts.

Otherwise accidents can occur.

22 Do not use the cable for purposes for which it is

not intended Do not use the cable to pull the plug

out of the outlet. Protect the cable from heat, oil

and sharp edges.

Mesures de sécurité speciques pour les scies a

ruban

• Ne pas utiliser l’outil lorsque le protecteur de lame

de scie est ouvert.

• Si la coupe concerne du bois rond ou de forme ir-

régulière, il est indispensable d’utiliser un dispositif

empêchant la pièce de tourner.

• Ne pas utiliser de lames de scie déformées ou en-

dommagées.

• Remplacez la plaquette lumière de table lorsqu’il est

endommagé.

• Raccordez un dispositif d’aspiration de la poussière.

Si des raccords d’aspiration de poussière et des dis-

positifs de collecte sont disponibles, assurez-vous

que ceux-ci sont raccordés et utilisés, notamment

lorsque vous coupez du bois.

• N’utilisez la scie à ruban que si l’ensemble des sys-

tèmes de protections sont mis en place

• Utilisez l’outil approprié. N’utilisez pas de machine

de faible puissance pour les travaux lourds. N’utilisez

pas les outils à des ns pour lesquelles ils ne sont

pas conçus. N’employez pas une scie à ruban par

exemple pour découper des branches ou du bois de

chauffage. Faites attention : l’utilisation de la scie à

ruban et la vitesse à utiliser dépendent du type de

matériau à couper

• Ne pas nettoyer la scie à ruban pendant l’utilisation.

• Utilisez des équipements de protection individuelle:

- Portez un casque de protection auditif.

- Utilisez un masque de protection ou masque

anti poussière.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach BS3000 Primaster Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info