Bedienungsanleitung Scheppach CAG115-20ProS (Seite 20 von 92) (Deutsch, Englisch, Französisch, Polnisch)

781689

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

20 | GB

We accept no liability for accidents or damage that

occur due to a failure to observe this manual and the

safety instructions.

2. Device description (Fig. 1, 2)

1. Guard

2. Spindle locking

3. Safety switch

4. On/off switch

5. Face spanner

6. Additional handle

7. Grinding wheel

8. Battery (not included in the scope of delivery)

3. Scope of delivery

• Cordless Angle Grinder

• Additional handle

• Face spanner

• Instruction manual

4. Intended use

This machine is intended to be used as a grinder or

a cut-off tool.

Sanding, polishing, hole cutting and wire brushing

are not recommended to be performed with this tool.

The equipment is to be used only for its prescribed

purpose. Any other use is deemed to be a case of

misuse. The user / operator and not the manufactur-

er will be liable for any damage or injuries of any kind

caused as a result of this.

To use the equipment properly you must also observe

the safety information, the assembly instructions and

the operating instructions to be found in this manual.

All persons who use and service the equipment have

to be acquainted with this manual and must be in-

formed about the equipment’s potential hazards.

It is also imperative to observe the accident preven-

tion regulations in force in your area.

The same applies for the general rules of health and

safety at work.

The manufacturer will not be liable for any changes

made to the equipment nor for any damage resulting

from such changes.

The machine may be used only with original acces-

sories and original tools of the manufacturer.

The safety, workplace and maintenance instructions

of the manufacturer as well as the dimensions speci-

ed in the technical data must be observed.

1. Introduction

Manufacturer:

scheppach

Fabrikation von Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

Dear customer,

we wish you a pleasant and successful working ex-

perience with your new scheppach machine.

Note:

According to the applicable product liability law the

manufacturer of this device is not liable for damages

which arise on or in connection with this device in

case of:

• improper handling,

• non-compliance with the instructions for use,

• repairs by third party, non authorized skilled work-

ers,

• installation and replacement of non-original spare

parts,

• improper use,

• failures of the electrical system due to the

non-compliance with the electrical specications

and the VDE 0100, DIN 57113 / VDE 0113 regu-

lations

Recommendations:

Read the entire text of the operating instructions pri-

or to the assembly and operation of the device.

These operating instructions are intended to make it

easier for you to get familiar with your device and uti-

lize its intended possibilities of use.

The operating instructions contain important notes

on how to work safely, properly and economically

with your machine and how to avoid dangers, save

repair costs, reduce downtime, and increase the reli-

ability and working life of the machine.

In addition to the safety regulations contained herein,

you must in any case comply with the applicable reg-

ulations of your country with respect to the operation

of the machine.

Put the operating instructions in a clear plastic fold-

er to protect them from dirt and humidity, and store

them near the machine. The instructions must be

read and carefully observed by each operator prior

to starting the work. Only persons who have been

trained in the use of the machine and have been in-

formed on the related dangers and risks are allowed

to use the machine. The required minimum age must

be met.

In addition to the safety notes contained in the pres-

ent operating instructions and the special regulations

of your country, the generally recognized technical

rules for the operation of wood working machines

must be observed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach CAG115-20ProS Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info