Bedienungsanleitung Scheppach CDD45-20ProS (Seite 19 von 76) (Deutsch, Englisch, Französisch, Polnisch)

781648

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

GB | 19

POISONOUS DUSTS!

Harmful / noxious dusts generated from your work rep-

resent a risk to the health of the person operating the

device and to anyone near the work area. Wear safe-

ty glasses and a dust mask! Do not drill any material

containing asbestos. Asbestos is a known carcinogen.

Hold the electrical power tool rmly. High reaction

torques may occur momentarily during tightening or

loosening of screws.

If the inserted tool jams, switch off the electrical pow-

er tool immediately. Be prepared for high reaction tor-

ques as they may cause kickback. The inserted tool

may jam if the electrical power tool is overloaded or is

held at an angle to the workpiece.

Before you carry out any tasks on the device, trans-

port or store it, make sure that the direction of rotation

switch is in the middle position (lock). To prevent the

device from starting up unintentionally.

Attention - Service lines!

Danger! Take steps to ensure that you do not hit

upon any service lines (electricity, gas, water) when

working with electrical appliances. Check, if need be

with a service line detector, before you start to cut or

bore into a surface.

Information on the rechargeable battery

• Please observe the operating manual for the re-

chargeable batteries.

Information on the charging unit and charging

process

• Please observe the operating manual for the

charging unit.

Careful handling and use of battery devices

• Charge the batteries only in chargers that are

recommended by the manufacturer. Risk of re

if a charger that is suitable for a specic type of

battery is used with other batteries.

• In the power tools, use only the batteries de-

signed for the purpose. The use of other batter-

ies may result in injuries and risk of re.

• Keep the unused battery away from paper

clips, coins, keys, nails, screws and other small

metal objects, which could cause bridging of

the contacts. A short circuit between the battery

contacts may cause burns or re.

• If used incorrectly, liquid may leak from the

battery. Avoid contact with this. In the event of

accidental contact, rinse off with water. If the

liquid gets into eyes, seek medical assistance.

Leaking battery uid may cause skin irritations

or burns.

• Ensure that the device is switched off before in-

serting the battery. Inserting a battery into a power

tool that is switched on may result in accidents.

•

c. Disconnect the plug from the power source

and/or remove the battery pack, if detachable,

from the power tool before making any adjust-

ments, changing accessories, or storing pow-

er tools. Such preventive safety measures reduce

the risk of starting the power tool accidentally.

d. Store idle power tools out of the reach of chil-

dren and do not allow persons unfamiliar with

the power tool or these instructions to oper-

ate the power tool. Power tools are dangerous in

the hands of untrained users.

e. Maintain power tools and accessories. Check

for misalignment or binding of moving parts,

breakage of parts and any other condition

that may affect the power tool’s operation. If

damaged, have the power tool repaired before

use. Many accidents are caused by poorly main-

tained power tools.

f. Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

g. Use the power tool, accessories and tool bits

etc. in accordance with these instructions,

taking into account the working conditions

and the work to be performed. Use of the power

tool for operations different from those intended

could result in a hazardous situation.

h. Keep handles and grasping surfaces dry,

clean and free from oil and grease. Slippery

handles and grasping surfaces do not allow for

safe handling and control of the tool in unexpect-

ed situations.

5) Service

a. Have your power tool serviced by a qualied

repair person using only identical replace-

ment parts. This will ensure that the safety of the

power tool is maintained.

6. Additional Safety Warnings

Safety advice relating to cordless drill drivers

• Hold the device by the insulated handle surfaces

when you are undertaking work where there is

the danger of the screw striking hidden electricity

cables or the device’s mains lead. Contact of the

screw with a live wire could cause metal parts of the

device to become live and lead to electric shock.

• Children or persons who lack the knowledge or expe-

rience to use the device or whose physical, sensory

or intellectual capacities are limited must never be

allowed to use the device without supervision or in-

struction by a person responsible for their safety. Chil-

dren must never be allowed to play with the device.

• Securely support the workpiece. A workpiece held

in a clamp or vice is kept more securely in place

than one held by your hand.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach CDD45-20ProS Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info