Bedienungsanleitung Scheppach CDD45-20ProS (Seite 22 von 76) (Deutsch, Englisch, Französisch, Polnisch)

781648

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

22 | GB

Hard screwdriving conditions (into metal):

Particularly high torques can occur, for example with

metal screws tightened by socket tool bits. Select a

lower rotation speed.

Soft screwdriving conditions (e.g. into soft

wood):

You should also select a low speed in order not to

damage the wood workpiece surface through contact

with the metal screw head.

Use a countersinker.

When drilling into wood, metal and other materials, take

note of the following advice: With small diameter drill

bits use a high drill speed. For large diameter drill bits,

use a low drill speed. For hard materials, select a low

drill speed. For soft materials, select a high drill speed.

Secure or x down the workpiece (if possible) in a

clamp or vice.

Mark the intended position of the hole with a centre

punch or a nail and select a low drill speed for drilling.

Take the rotating drill bit out of the hole frequently so

that swarf or drill dust can be re-moved and the hole

and tool is ventilated.

Drilling in metal:

Use a metal drill bit (HSS). For the best results, you

should cool the bit with oil.

Metal drill bits can also be used to drill into plastic.

Drilling in stone:

Use a circular shafted masonry drill bit with a hard-

ened metal tip.

Drilling in wood:

Normally you should use a wood drill with a cen-

tring point. For deep holes, use an auger type bit.

For large diameter holes, use a forstner bit. You can

screw small screws into soft wood without the need

for pre-drilling.

12. Cleaning

Danger!

Always pull out the battery pack before starting any

cleaning work.

• Keep all safety devices, air vents and the motor

housing free of dirt and dust as far as possible.

Wipe the equipment with a clean cloth or blow it

with compressed air at low pressure.

• We recommend that you clean the device immedi-

ately each time you have nished using it.

• Clean the equipment regularly with a moist cloth

and some soft soap. Do not use cleaning agents

or solvents; these could attack the plastic parts of

the equipment. Ensure that no water can seep into

the device. The ingress of water into an electric tool

increases the risk of an electric shock.

13. Storage

Store the device and its accessories in a dark, dry

and frost-proof place that is inaccessible to children.

The optimum storage temperature is between 5 and

30˚C. Store the electrical tool in its original packag-

ing. Cover the electrical tool in order to protect it from

dust and moisture. Store the operating manual with

the electrical tool.

14. Maintenance

There are no parts inside the equipment which re-

quire additional maintenance.

Service information

Please note that the following parts of this product

are subject to normal or natural wear and that the fol-

lowing parts are therefore also required for use as

consumables.

Wear parts*: carbon brushes

* Not necessarily included in the scope of delivery!

15. Disposal and recycling

The equipment is supplied in packaging to prevent it

from being damaged in transit. The raw materials in

this packaging can be reused or recycled. The equip-

ment and its accessories are made of various types

of material, such as metal and plastic. Defective com-

ponents must be disposed of as special waste. Ask

your dealer or your local council.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach CDD45-20ProS Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info