Bedienungsanleitung Scheppach CJS254-20ProS (Seite 15 von 72) (Deutsch, Englisch, Französisch, Polnisch)

781465

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

GB | 15

We accept no liability for accidents or damage that

occur due to a failure to observe this manual and the

safety instructions.

2. Device description

1. Pommel grip

2. ON / OFF switch (with stop)

3. Oscillation speed setting wheel

4. Housing

5. Ventilation grill

6. Clamping lever

7. Base plate, light metal

8. Pendulum action switch

9. Guide roller

10. Saw blade

11. Guide fence openings (with locking screws)

12. Chip guard

13. Contact guard

14. Quick-release chuck

15. Guide fence

3. Scope of delivery

• 1 Jigsaw including

• 1 Guide fence

• 1 Operating instructions

• 1 Saw blades for wood

• 1 Saw blade for metal

4. Intended use

The equipment is to be used only for its prescribed

purpose. Any other use is deemed to be a case of

misuse. The user / operator and not the manufacturer

will be liable for any damage or injuries of any kind

caused as a result of this.

To use the equipment properly you must also observe

the safety information, the assembly instructions and

the operating instructions to be found in this manual.

All persons who use and service the equipment have

to be acquainted with this manual and must be in-

formed about the equipment’s potential hazards.

It is also imperative to observe the accident preven-

tion regulations in force in your area.

The same applies for the general rules of health and

safety at work.

The manufacturer will not be liable for any changes

made to the equipment nor for any damage resulting

from such changes.

The machine may be used only with original accesso-

ries and original tools of the manufacturer.

The safety-, workplace- and maintenance specica-

tions of the manufacturer as well as the dimensions

specied in the technical data must be observed.

1. Introduction

Manufacturer:

scheppach

Fabrikation von Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

Dear customer,

we wish you a pleasant and successful working expe-

rience with your new scheppach machine.

Note:

According to the applicable product liability law the

manufacturer of this device is not liable for damages

which arise on or in connection with this device in case

of:

• improper handling,

• non-compliance with the instructions for use,

• repairs by third party, non authorized skilled work-

ers,

• installation and replacement of non-original spare

parts,

• improper use,

• failures of the electrical system due to the non-com-

pliance with the electrical specications and the

VDE 0100, DIN 57113 / VDE 0113 regulations

Recommendations:

Read the entire text of the operating instructions prior

to the assembly and operation of the device.

These operating instructions are intended to make it

easier for you to get familiar with your device and uti-

lize its intended possibilities of use.

The operating instructions contain important notes on

how to work safely, properly and economically with

your machine and how to avoid dangers, save repair

costs, reduce downtime, and increase the reliability

and working life of the machine.

In addition to the safety regulations contained herein,

you must in any case comply with the applicable reg-

ulations of your country with respect to the operation

of the machine.

Put the operating instructions in a clear plastic folder

to protect them from dirt and humidity, and store them

near the machine. The instructions must be read and

carefully observed by each operator prior to starting

the work.

Only persons who have been trained in the use of the

machine and have been informed on the related dan-

gers and risks are allowed to use the machine. The

required minimum age must be met.

In addition to the safety notes contained in the pres-

ent operating instructions and the special regulations

of your country, the generally recognized technical

rules for the operation of wood working machines

must be observed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach CJS254-20ProS Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info