Bedienungsanleitung Scheppach CSD40-20Li (Seite 22 von 88) (Deutsch, Englisch, Französisch, Polnisch)

782591

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58

22 | GB

always ensure that the plug is not in the mains sock-

et.

Note! A new battery pack, or one that has not been in

use for an extended period, must be charged

up before the rst / renewed usage. The battery pack

attains its full capacity after ca. 3–5 charging cycles.

CAUTION! Always ensure the plug is removed from

the mains socket before inserting a battery pack

into, or removing one from, the charging station. Nev-

er charge the battery pack if the ambient tempera-

ture is less than 10 °C or greater than 40 °C.

1. Insert the battery pack 6 into the quickcharger 15

(see Fig. C).

2. Insert the power plug into the socket. The ashing

red charge indicator LED 16 shows that charging is

in progress. The red charging control LED 16 extin-

guishes as soon as the battery pack is fully charged.

The green charging control LED 17 signals to you

that the charging process is complete and

the battery pack 6 is ready for service. Never charge

the battery pack for a second time immediately af-

ter a fast charging process has been completed.

This can give rise to the battery pack becoming over-

charged and to a reduced service life of the battery

and charging station.

Switch the charger off for at least 15 minutes be-

tween two successive charging procedures.

Remove the power plug from the wall socket.

Insertion / removal of a batterypack into the appli-

ance

Ensure that the appliance is switched off before in-

serting the battery. The insertion of a battery into an

electrical appliance that is switched on can lead to

accidents.

Inserting the rechargeable battery pack:

Move the rotation switch 2 into the middle position

(lock) and push the rechargeable battery pack 6 into

the handle until it engages.

Removing the rechargeable battery pack:

Press the release button 7 and remove the recharge-

able battery pack

Changing tools

Your cordless electric drill / screwdriver has a fully

automatic spindle lock and is tted with an

enclosed keyless chuck incorporating the latest tech-

nology .

Once the motor has come to a halt, the drive shaft is

automatically locked, so that the chuck 13 can

• Health hazard due to electrical power, with the use

of improper electrical connection cables.

• Furthermore, despite all precautions having been

met, some non-obvious residual risks may still re-

main.

• Residual risks can be minimised if the „safety in-

structions“ and the „Proper use“ are observed

along with the whole of the operating instructions.

• Avoid accidental starting of the machine: the oper-

ating button may not be pressed when inserting the

plug in an outlet. Use the tool that is recommend-

ed in this manual.. This ensures that your machine

performs optimally.

• Hands may never enter the processing zone when

the machine is in operation.

9. Intended use

The equipment is to be used only for its prescribed

purpose. Any other use is deemed to be a case of

misuse. The user / operator and not the manufactur-

er will be liable for any damage or injuries of any kind

caused as a result of this.

To use the equipment properly you must also observe

the safety information, the assembly instructions and

the operating instructions to be found in this manual.

All persons who use and service the equipment have

to be acquainted with this manual and must be in-

formed about the equipment’s potential hazards.

It is also imperative to observe the accident preven-

tion regulations in force in your area.

The same applies for the general rules of health and

safety at work.

The manufacturer will not be liable for any changes

made to the equipment nor for any damage resulting

from such changes.

The machine may be used only with original acces-

sories and original tools of the manufacturer.

The safety-, workplace- and maintenance specica-

tions of the manufacturer as well as the dimensions

specied in the technical data must be observed.

Please note that our equipment has not been de-

signed for use in commercial, trade or industri-

al applications. Our warranty will be voided if the

equipment is used in commercial, trade or industrial

businesses or for equivalent purposes.

10. Installation

m IMPORTANT!

You must fully assemble the appliance before

using it for the rst time!

Charging the battery pack

DANGER OF ELECTRIC SHOCK! Before cleaning

or servicing the charging station or the battery pack

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach CSD40-20Li Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info