Bedienungsanleitung Scheppach DM600VARIO (Seite 19 von 124) (Deutsch, Englisch, Französisch, Italienisch, Polnisch)

781460

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

GB | 19

8. Wear suitable clothing

- Do not wear wide clothing or jewellery, which

can become entangled in moving parts.

- When working outdoors, anti-slip footwear is

recommended.

- Tie long hair back in a hair net.

9. Use protective equipment

- Wear protective goggles.

- Wear a mask when carrying out dust-creating

work.

10. Connect the dust extraction device

- If connections for dust extraction and a col-

lecting device are present, make sure that

they are connected and used properly.

- Operation in enclosed spaces is only permit-

ted with the use of a suitable extraction sys-

tem.

11. Do not abuse the cord.

- Never yank the cord do disconnect it from the

socket. Keep the cord away from heat, oil and

sham edges.

12. Secure work

- For long workpieces, an additional supporting

surface (table, trestles, etc.) is required in or-

der to prevent tipping of the machine.

- Always press the workpiece rmly against the

working surface and stop in order to prevent

wobbling or twisting of the workpiece.

13. Do not overreach

- Keep proper footing and balance at all times.

- Avoid awkward hand positions in which one

or both hands could touch the saw blade as

the result of a sudden slip.

14. Maintain tools with care

- Keep cutting tools sharp and clean for better

and safer performance.

- Follow instruction for lubricating and chang-

ing accessories.

- Inspect tool cords periodically and if dam-

aged have them repaired by an authorized

service facility.

- Inspect extension cords periodically and re-

place if damaged.

- Keep handles dry, clean and free from oil and

grease.

15. Disconnect tools

- Never remove loose splinters, chips or

jammed pieces of wood when the saw blade

is running.

- When the electric tool is not in use, before

maintenance and when changing tools such

as the saw blade, drill bit, milling cutter.

16. Remove adjusting keys and wrenches

- Form the habit of checking to see that keys

and adjusting wrenches are removed from

the tool before turning it on.

The machine may only be used, maintained or re-

paired by trained persons who are familiar with the

machine and have been informed about the dangers.

Unauthorized modications of the machine exclude

a liability of the manufacturer for damages resulting

from the modications.

The machine is intended for use only with original

spare parts and original tools from the producer.

Any other use is considered to be not intended. The

manufacturer excludes any liability for resulting dam-

ages, the risk is exclusively borne by the user.

m Please note that our equipment has not been de-

signed for use in commercial, trade or industrial appli-

cations. Our warranty will be voided if the equipment

is used in commercial, trade or industrial businesses

or for equivalent purposes.

5. Safety information

m CAUTION! The following basic safety precau-

tions must be observed while using electric tools

to protect against electric shock, injury and risk

of ire. Please read all instructions before using

this electric tool and keep the safety instructions

in a safe place.

Safe operation

1. Keep work area clear

- Cluttered areas and benches invite injuries.

2. Consider work area environment

- Do not expose tools to rain.

- Do not use tools in damp or wet locations.

- Keep work area well lit.

- Do not use tools in the presence of ammable

liquids or gases.

3. Guard against electric shock

- Avoid body contact with earthed or grounded

surfaces (e. g. pipes, radiators, ranges, refrig-

erators).

4. Keep other people away!

- Do not let other people — especially children

— touch the electric tool or its cable. Keep

them clear of the work area.

5. Store idle tools

- When not in use, tools should be stored in a

dry locked- up place, out of the reach of chil-

dren.

6. Do not force the tool

- It will do the job better and safer at the rate for

which it was intended.

7. Use the right tool

- Do not force small tools to do the job of a

heavy tool.

- Do not use the electric tool for purposes for

which it is not intended. For example, do not

use handheld circular saws for the cutting of

branches or logs.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach DM600VARIO Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info