Bedienungsanleitung Scheppach DP18VARIO (Seite 17 von 80) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Polnisch)

781655

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58

17 І 80

 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58

GB Caution - Read the operating instructions to reduce the risk of inquiry

GB Wear safety goggles!

GB Wear ear-muffs!

GB Wear a breathing mask!

Device Description (Fig.1-2)

1. Machine foot

2. Column

3. Clamping handle

4. Drilling table

5. Motor

6. Speed adjustment lever (handle)

7. V-belt cover

8. Digital display

9. On and off switch

10. Handle

11. Folding swarf protector

12. Drill chuck (illustration may differ)

13. Roller support

14. Machine head

15. Working light/laser control panel

16. Depth indicator with stop

17. Crank handle

18. Drilling table holder

19. Hexagonal screw

20. Crank holder

21. Wing screws

22. Tapered mandrel

A. Hexagon spanner

B. Taper key

C. 4 mm Allen key

D. 3 mm Allen key

Unpacking

• Open the packaging and remove the device care-

fully.

• Remove the packaging material as well as the pack-

aging and transport bracing (if available).

• Check that the delivery is complete.

• Check the device and accessory parts for transport

damage.

• If possible, store the packaging until the warranty

period has expired.

ATTENTION

The device and packaging materials are not toys!

Children must not be allowed to play with plastic

bags, lm and small parts! There is a risk of swal-

lowing and suffocation!

Intended use

The bench drill is designed for drilling in metal, wood,

plastic and tiles. Straight shank drills with a drilling di-

ameter from 3 mm to 16 mm can be used. The device

is intended to be used by do-ityourselfers. It was not

designed for heavy commercial use. The tool is not

to be used by persons. under the age of 16. Children

over the age of 16 may use the tool except under su-

pervision. The manufacturer is not liable for damage

caused by an improper use or incorrect operation of

this device. The bench-type circular saw is designed

for the slitting and cross-cutting of all types of timber,

commensurate with the machine’s size. The machine

is not to be used for cutting any type of roundwood.

Introduction

MANUFACTURER:

scheppach Fabrikation von

Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

DEAR CUSTOMER,

We hope your new tool brings you much enjoyment and

success.

NOTE:

According to the applicable product liability laws, the

manufacturer of the device does not assume liability

for damages to the product or damages caused by the

product that occurs due to:

• Improper handling,

• Non-compliance of the operating instructions,

• Repairs by third parties, not by authorized service

technicians,

• Installation and replacement of non-original spare

parts,

• Application other than specied,

• A breakdown of the electrical system that occurs due

to the non-compliance of the electric regulations and

VDE regulations 0100, DIN 57113 / VDE0113.

WE RECOMMEND:

Read through the complete text in the operating instruc-

tions before installing and commissioning the device.

The operating instructions are intended to help the user

to become familiar with the machine and take advan-

tage of its application possibilities in accordance with the

recommendations. The operating instructions contain

important information on how to operate the machine

safely, professionally and economically, how to avoid

danger, costly repairs, reduce downtimes and how to in-

crease reliability and service life of the machine.

In addition to the safety regulations in the operating

instructions, you have to meet the applicable regula-

tions that apply for the operation of the machine in your

country. Keep the operating instructions package with

the machine at all times and store it in a plastic cover

to protect it from dirt and moisture. Read the instruction

manual each time before operating the machine and

carefully follow its information. The machine can only be

operated by persons who were instructed concerning the

operation of the machine and who are informed about

the associated dangers. The minimum age requirement

must be complied with. In addition to the safety require-

ments in these operating instructions and your country’s

applicable regulations, you should observe the generally

recognized technical rules concerning the operation of

woodworking machines.

GB Do not wear long hair uncovered. Use a hair net.

GB Do not wear gloves.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach DP18VARIO Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info